AEG OKO_EXCLUSIV KDW1 Kullanım Talimatları Kılavuzu - Sayfa 9
Bulaşık Makinesi AEG OKO_EXCLUSIV KDW1 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. AEG OKO_EXCLUSIV KDW1 40 sayfaları. Electrolux operating instructions dishwasher ko_exclusiv kdw1
Sayfayı Yazdır
Before using your dishwasher for the first time
1. Ensure that the electrical and water connections comply with the
installation instructions.
2. Remove all packaging from inside the appliance.
3. Set the water softener.
4. Pour 1 litre of water inside the salt container and then fill with salt.
5. Fill the rinse-aid dispenser.
Setting the water hardness range
The dishwasher is equipped with a water softener designed to remove
minerals and salts from the water supply, which would have a detrimental or
adverse effect on the operation of the appliance.
The higher the content of these salts, the harder your water is.
Water hardness is measured in equivalent scales, Clarke, French degrees and
PPM (parts per Million).
The softener should be adjusted according to the hardness of the water in
your area. Your local Water Authority can advise you on the hardness of the
water in your area.
The dishwasher is factory set at level 2.
Clarke degrees
0 - 6
7 - 14
15 - 28
29 - 42
43 - 56
57 - 63
If your water hardness is below level 1 it is already soft and therefore
there is no need to use salt.
In this case adjust the water softener on level 1 without using salt.
Water hardness
French degrees
(°TH)
(Parts per Million)
0 - 8
9 - 20
21 - 40
41 - 60
61 - 80
81 - 90
PPM
Level
0 - 80
81 - 200
201 - 400
401 - 600
601 - 800
801 - 900
Use of salt
NO
*
YES
1
YES
2
YES
3
YES
4
YES
5
9