AEG 20604 G Kullanım ve Kurulum Kılavuzu - Sayfa 21

Hob AEG 20604 G için çevrimiçi göz atın veya pdf Kullanım ve Kurulum Kılavuzu indirin. AEG 20604 G 26 sayfaları. Gas hob
Ayrıca AEG 20604 G için: Çalıştırma ve Kurulum Talimatları (27 sayfalar)

Sayfayı Yazdır

1. Description of the Hob
2. Engineer Technical Data
3. Cut out Size

Permanent Connection

In the case of a permanent connection, it is necessary that you install

a double pole switch between the hob and the electricity supply

(mains), with a minimum gap of 3 mm. between the switch contacts

and of a type suitable for the required load in compliance with the

current electric regulations.

The switch must not break the yellow and green earth cable at any

point.

Ensure that the hob supply cord does not come into contact with

surfaces with temperatures higher than 50 deg. C.

Wiring diagram

A. IGNITOR SWITCH

B. IGNITOR UNIT

220/240