Brother MFC-J6930DW Referans Kılavuzu - Sayfa 23

Hepsi Bir Arada Yazıcı Brother MFC-J6930DW için çevrimiçi göz atın veya pdf Referans Kılavuzu indirin. Brother MFC-J6930DW 34 sayfaları. Mfc-j6930dw
Ayrıca Brother MFC-J6930DW için: Hızlı Kurulum Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Ürün Güvenlik Kılavuzu (20 sayfalar)

Sayfayı Yazdır

Error Message

Cannot Detect

Cannot Detect Ink

Volume

Data Remaining in

Memory

Disconnected

Document Jam/too

Long

High Temperature

Hub is Unusable.

Ink Absorber

NearFull

Ink Absorber Pad

Full

Action

Check the model numbers of the ink cartridges and install the correct

ink cartridges.

See Related Information: Supply Specifications at the end of this

section.

Replace the cartridge with a Brother Original ink cartridge. If the error

message remains, contact Brother customer service or your local

Brother dealer.

Press

. The machine will cancel the job and clear it from the

memory. Try to print again.

Try to send or receive again.

If calls are stopped repeatedly and you are using a VoIP (Voice over

IP) system, try changing the Compatibility to Basic (for VoIP).

See Related Information: Telephone Line Interference/VoIP at the end

of this section.

The document was not inserted or fed correctly, or the document

scanned from the ADF was too long.

For more information, see the Online User's Guide: Document Jams.

After cooling the room, allow the machine to cool down to room

temperature. Try again when the machine has cooled down.

Hubs, including a USB flash drive with a built-in hub, are not

supported. Unplug the device from the USB direct interface.

The ink absorber box or flushing box must be replaced soon. Contact

Brother customer service or your local Brother dealer.

The ink absorber box or flushing box must be replaced. Contact

Brother customer service or your local Brother Authorised Service

Centre to have your machine serviced.

Reasons for cleaning are:

1. The machine automatically cleans itself after you remove the

power cord and plug it back in.

2. After a paper jam has been cleared, the machine automatically

cleans itself before the next received page is printed.

3. The machine automatically cleans itself after sitting idle for more

than 30 days (infrequent use).

4. The machine automatically cleans itself after ink cartridges of the

same colour have been replaced 12 times.