AEG 35610C Kullanım Talimatları Kılavuzu - Sayfa 16

Hob AEG 35610C için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. AEG 35610C 28 sayfaları. Gas hob
Ayrıca AEG 35610C için: Kullanım ve Kurulum Kılavuzu (24 sayfalar), Çalıştırma ve Kurulum Talimatları (24 sayfalar)

On the end of the shaft, which includes the GJ 1/2" threaded elbow, adjustment is fixed so

that the washer is fitted between the components as shown in the diagram. Screw the

parts together without using excessive force.

Gas Connection

Connection to the gas supply should be with either rigid or semi-rigid pipe, i.e. steel or

copper.

The connection should be suitable for connecting to RC 1/2 (1/2 BSP male thread).

When the final connection has been made, it is essential that a thorough leak test is

carried out on the hob and installation.

Ensure that the main connection pipe does not exert any strain on the hob.

It is important to install the elbow correctly, with the shoulder on the end of the thread,

fitted to the hob connecting pipe.

Failure to ensure the correct assembly will cause leakage of gas.

FO 0264

A) End of shaft with nut

B) Washer

C) Elbow

FO 0814