6A
Configuration using the CD‑ROM (Windows
NOTE:
If the Brother screen does not appear automatically, go to Computer (My Computer).
(For Windows
8: click the
(File Explorer) icon on the taskbar, and then go to Computer.)
®
Double‑click the CD‑ROM icon, and then double‑click start.exe.
Connection Type
6B
Configuration without using the CD‑ROM (Windows
Download the full driver and software package from the Brother Solutions Center.
(For Windows
)
solutions.brother.com/windows
®
(For Macintosh)
solutions.brother.com/mac
After you download the driver and software package, follow the on‑screen instructions until the Connection Type screen appears. Refer to
(Windows
®
).
6C
Wireless setup for mobile devices
Connect the machine and wireless LAN access point/router from the machine's control panel.
On the machine's control panel, press
> Setup Wizard > Yes.
Select the specified SSID, and then enter the
Network key.
Wireless setup is now complete.
Print and scan using your mobile device
Download "Brother iPrint&Scan" to start using your machine with mobile devices.
solutions.brother.com/ips
Wireless Network Connection
[Recommended]
Select this option if you have a USB cable to
use temporarily for wireless setup.
Select this option if you do not have a USB cable.
NOTE:
Before you can use your machine with your mobile device, download "Brother iPrint&Scan."
)
®
For USB Connection
For Wired Network Connection
Connect a network cable first.
For Wireless Network Connection
We recommend preparing a USB cable
to use temporarily during the wireless
setup.
without CD‑ROM drive or Macintosh)
®
Follow the on‑screen
instructions until the
Connection Type screen
appears.
Follow the on‑screen
Finish
instructions to continue
installation.
NOTE:
If connection is unsuccessful, repeat this step.
Follow the on‑screen
Finish
instructions to continue
installation.
NOTE:
If connection is unsuccessful, repeat this step.
6A
Configuration using the CD-ROM
Sayfayı Yazdır