Brother MFC-T800W Gelişmiş Kullanıcı Kılavuzu - Sayfa 35
Hepsi Bir Arada Yazıcı Brother MFC-T800W için çevrimiçi göz atın veya pdf Gelişmiş Kullanıcı Kılavuzu indirin. Brother MFC-T800W 39 sayfaları.
Ayrıca Brother MFC-T800W için: Gelişmiş Kullanıcı Kılavuzu (40 sayfalar), Gelişmiş Kullanıcı Kılavuzu (46 sayfalar), Hızlı Başlangıç Kılavuzu (29 sayfalar)
Sayfayı Yazdır
External telephone
A TAD (telephone answering device) or
telephone that is connected to your
machine.
F/T Ring Time
The length of time that the Brother
machine rings (when the Receive Mode
setting is Fax/Tel) to notify you to pick up
a voice call that it answered.
Fax Detect
Enables your machine to respond to CNG
tones if you interrupt a fax call by
answering it.
Fax Journal
Lists information about the last 200
incoming and outgoing faxes. TX means
Transmit. RX means Receive.
Fax tones
The signals sent by sending and receiving
fax machines while communicating
information.
Fax/Tel
You can receive faxes and telephone
calls. Do not use this mode if you are
using a telephone answering device
(TAD).
Fine resolution
Resolution is 203 × 196 dpi. It is used for
small print and graphs.
Greyscale
The shades of grey available for copying,
scanning and faxing photographs.
Group number
A combination of Speed Dial numbers that
are stored in a Speed Dial location for
Broadcasting.
Journal Period
The pre-programmed time period
between automatically printed Fax
Journal reports. You can print the Fax
Journal report on demand without
interrupting the cycle.
LCD (Liquid Crystal Display)
The display screen on the machine that
shows interactive messages during On-
Screen Programming and shows the date
and time when the machine is idle.
Manual fax
You can press Hook to hear the receiving
fax machine answer before you press
Mono Start to begin sending the fax.
Memory Receive
Receives faxes into the machine's
memory when the machine is out of paper.
Menu mode
Programming mode for changing your
machine's settings.
OCR (optical character recognition)
(MFC models only)
Presto! PageManager software
application converts an image of text to
text you can edit.
Overseas Mode
Makes temporary changes to the fax
tones to accommodate noise and static on
overseas telephone lines.
Pause
Allows you to place a 3.5 second delay in
the dialling sequence while you are
dialling using the dial pad or while you are
storing Speed Dial numbers. Press
Redial/Pause key on the control panel as
many times as needed for longer pauses.
Photo resolution
A resolution setting that uses varying
shades of grey for the best representation
of photographs.
Pulse
A form of rotary dialling on a telephone
line.
Real Time Transmission
When the memory is full, you can send
faxes in real time.
Remaining jobs
You can check which jobs are waiting in
memory and cancel jobs individually.
Glossary
B
31