Brother MFC-T800W Gelişmiş Kullanıcı Kılavuzu - Sayfa 13
Hepsi Bir Arada Yazıcı Brother MFC-T800W için çevrimiçi göz atın veya pdf Gelişmiş Kullanıcı Kılavuzu indirin. Brother MFC-T800W 40 sayfaları.
Ayrıca Brother MFC-T800W için: Gelişmiş Kullanıcı Kılavuzu (39 sayfalar), Gelişmiş Kullanıcı Kılavuzu (46 sayfalar), Hızlı Başlangıç Kılavuzu (29 sayfalar)
Sayfayı Yazdır
NOTE
• If you did not use up any of the numbers
for Groups, you can "broadcast" faxes to
as many as 90 different numbers.
• The machine's available memory will vary
depending on the types of jobs in the
memory and the numbers used for
broadcasting.
• If the Out of Memory message
appears, press Stop/Exit to cancel or
Mono Start to send the pages scanned so
far.
Cancelling a Broadcast in progress
a
Press Menu, 3, 5.
The LCD will show the fax number or
name being dialled and the
Broadcasting job number.
b
Press a or b to choose the Broadcasting
job number.
c
Press OK.
The LCD will ask you the following
question:
1.Clear
2.Exit
d
To cancel the broadcast, press 1.
e
Press Stop/Exit.
Sending a fax (MFC models only)
Real Time Transmission
When you are sending a fax, the machine will
scan the documents into the memory before
sending. Then, as soon as the telephone line
is free, the machine will start dialling and
sending.
Sometimes, you may want to send an
important document immediately, without
waiting for the machine to scan it into
memory. You can set Real Time TX to On
for all documents or Next Fax Only for the
next fax only.
Sending in real time for all faxes
3
a
Press
b
Press Menu, 3, 2, 3.
c
Press a or b to choose On (or Off).
Press OK.
d
Press 2 so you can continue sending
your fax.
e
Load your document.
f
Enter the fax number.
g
Press Mono Start.
Sending in real time for the next fax
only
a
Press
b
Press Menu, 3, 2, 3.
c
Press a or b to choose
Next Fax Only. Press OK.
d
Press a or b to choose Next Fax:Off
or Next Fax:On.
e
Press OK.
f
Press 2 so you can continue sending
your fax.
(FAX).
(FAX).
3
3
3
3
9