Brother Work Smart MFC-J475dw Hızlı Kurulum Kılavuzu - Sayfa 2
Hepsi Bir Arada Yazıcı Brother Work Smart MFC-J475dw için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Brother Work Smart MFC-J475dw 37 sayfaları. Work smart series inkjet all-in-one
Ayrıca Brother Work Smart MFC-J475dw için: Hava Baskı Kılavuzu (12 sayfalar), Özellikler (2 sayfalar), Hızlı Başlangıç Kılavuzu (35 sayfalar)
Sayfayı Yazdır
a
Remove the protective tape and film covering
the machine, and also from the LCD.
b
Remove the plastic bag a containing the ink
cartridges from on top of the paper tray.
c
Make sure you have all the components.
2
Connect the power cord
and telephone line
IMPORTANT
DO NOT connect the USB cable yet (if you are
using a USB cable).
a
Connect the power cord.
NOTE
• If you do not plan to use the fax feature on this
machine, go to step 3 on page 4.
• To prolong the life of the print head, provide the
best ink cartridge economy and maintain print
quality, we do not recommend unplugging the
machine frequently and/or leaving the machine
unplugged for extended periods of time. Each
time you plug the machine in, it automatically
cleans the print heads, which uses some of
your ink.
We recommend using
machine. Using
the machine, resulting in periodic, but less
frequent, cleaning of the print heads.
2
1
to power down the
allows minimal power to
b
Lift the scanner cover until it locks securely into
the open position.
c
Connect the telephone line cord.
Connect one end of the telephone line cord to
the jack marked LINE on the machine.
Carefully guide the telephone line cord into the
cable channel and out the back of the machine.
Connect the other end to a modular wall jack.
IMPORTANT
The telephone line cord MUST be connected to
the jack marked LINE on the machine.