Brother Work Smart MFC-J650dw Hızlı Başlangıç Kılavuzu - Sayfa 20
Hepsi Bir Arada Yazıcı Brother Work Smart MFC-J650dw için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Brother Work Smart MFC-J650dw 45 sayfaları. Work smart series inkjet all-in-one
Ayrıca Brother Work Smart MFC-J650dw için: Hava Baskı Kılavuzu (12 sayfalar), Özellikler (2 sayfalar), Temel Kullanım Kılavuzu (14 sayfalar), SSS & Sorun Giderme (6 sayfalar)
Sayfayı Yazdır
Wired Network
d
When the Firewall/AntiVirus detected screen
appears, choose Change the Firewall port
settings to enable network connection and
continue with the installation.
(Recommended), and then click Next.
If you are not using the Windows
the instructions provided with your firewall
software for information on how to add the
following network ports.
For network scanning, add UDP port 54925.
For network PC-Fax receiving, add UDP port
54926.
If you still have trouble with your network
connection, add UDP ports 137 and 161.
NOTE
• If there is more than one machine connected to
the network, choose your machine from the list,
and then click Next.
This window will not appear if there is only one
machine connected to the network, the
machine will be chosen automatically.
• If your machine is not found over the network,
confirm your settings by following the
on-screen instructions.
20
e
NOTE
• DO NOT cancel any of the screens during the
• If the Windows Security screen appears, click
f
®
Firewall, see
g
h
i
NOTE
The Brother Trial Photo Print screen appears
only once after restarting.
We recommend you try the Brother Trial Photo
Print selection to see the high quality output
available from your Brother machine.
Windows
The installation of the Brother drivers will
automatically start. The installation screens
appear one after another.
installation. It may take a few seconds for all
screens to appear.
the check box and click Install to complete the
installation correctly.
If the Environmental Advice for Imaging
Equipment screen appears, click Next.
When the On-Line Registration screen
appears, follow the on-screen instructions.
Click Next.
If you do not want to set your machine as the
default printer, clear the Set as Default Printer
check box, and then click Next.
When the Setup is Complete window
appears, confirm the settings, and then click
Next.
®