AEG 65300 K Kullanıcı Talimatları - Sayfa 14

Hob AEG 65300 K için çevrimiçi göz atın veya pdf Kullanıcı Talimatları indirin. AEG 65300 K 40 sayfaları. Ceramic glass hob

Before Using for the First Time

Wipe the ceramic glass cooking surface with a damp cloth to remove

any traces left from manufacturing.

Important: Do not use any caustic, abrasive cleaners! The surface could

be damaged.

To operate the TOUCH CONTROL sensor buttons, place your finger flat

on the desired button until the corresponding indicator illuminates, or

extinguishes, or the desired function is performed.

For quicker adjustment leave your finger on the button until the

desired value is reached.

All entries are acknowledged by an acoustic signal.

Switch on the appliance using the mains "On/Off" button.

The "Heat Setting/Residual Heat" display fields indicate j.

After the mains "On/Off" button has been operated to switch on your

appliance, one of the cooking zones must be selected using the cooking

zone selection buttons within approx. 10 seconds. Otherwise the appli-

ance switches off again for safety reasons.

Operate the mains "On/Off" button to completely switch off the appli-

ance.

After the individual cooking zones or the entire cooking surface have/

has been switched off, the presence of residual heat is indicated by h

(as in "Hot") in the "Heat Setting/Residual Heat" display fields of the

respective cooking zones.

If all cooking zones are switched off, the appliance switches off auto-

matically after a period of time.