AEG 6562 G Talimat ve Kurulum Kitabı - Sayfa 5
Hob AEG 6562 G için çevrimiçi göz atın veya pdf Talimat ve Kurulum Kitabı indirin. AEG 6562 G 10 sayfaları.
Sayfayı YazdırUse of Hose Assemblies.
If the appliance is to be installed
using a hose assembly, then
1. The hose must be AGA certified to
AS/NZS 1869 as class B or class D,
and utilised in accordance with
requirements of AS 5601
(AG 601).
2. The connection point between the
consumer piping and the hose must
be accessible with the appliance
installed.
Electrical Connection
This appliance is supplied with an
1800mm long flexible supply lead
and 3 pin plug. The point of
connection is located at the rear and
on the underside of the appliance.
Connect the appliance to a readily
accessible switched general purpose
outlet which is adjacent to the
appliance.
THIS APPLIANCE MUST BE
CONNECTED TO AN EARTHED
GENERAL PURPOSE OUTLET.
16
Service
Repairs carried out by
inexperienced persons may cause
injury or serious malfunction of the
appliance. Repairs must only be
carried out by a authorised person.
Contact your local AEG Service
Centre;
1 Stamford Road
Oakleigh Victoria 3166
Telephone 1300 650020
Disposal
Make the gas hob unusable by
cutting off the cable
Dispose of any packaging material
and old appliances at an authorised
disposal sites.
The primary air intake
aperture
Must never be accidentally blocked
by objects of any kind.
The symbol
on the product or on its packaging indicates that this
product may not be treated as household waste. Instead it shall be handed
over to the applicable collection point for the recycling of electrical and
electronic equipment. By ensuring this product is disposed of correctly, you
will help prevent potential negative consequences for the environment and
human health, which could otherwise be caused by inappropriate waste
handling of this product. For more detailed information about recycling of
this product, please contact your local city office, your household waste
disposal service or the shop where you purchased the product.
5