AEG 6562 G Talimat ve Kurulum Kitabı - Sayfa 9

Hob AEG 6562 G için çevrimiçi göz atın veya pdf Talimat ve Kurulum Kitabı indirin. AEG 6562 G 10 sayfaları.

Cleaning of gas burners

Clean the control panel and knobs plus

the pan grid, as well as burner caps and

rings, with ordinary cleansing agents.

Never use scouring powder, Brillo

pads, metal pads or other scouring

agents on enamelled or painted

surfaces!

Avoid boil-over

If water accidentally gets into the edge

of the burner head (boil-over) the

water must be removed with a lint-free

cloth before the burner is turned on

again.

Likewise, caps and grids must be

thoroughly wiped off before the gas

ring is used again so that the boil-over

does not permanently scar the enamel

or paint.

Ignition

1. Depress and turn the control knob

for the burner to the left to max.

flame . (Ignition position)

2. The ignition electrode will emit

sparks, and when the mixture of gas

and air is correct, the burner will be

ignited. If it is not possible to

connect the unit to mains, a

match may be used to ignite the

burner.

3. After starting the burner, press the

control knob for approx. 10

seconds to activate the automatic

thermo-couple (thermo sensor

ready).

5. The burner can now be regulated

between maximum and minimum