Brother ADS-4500W Hızlı Başlangıç Kılavuzu - Sayfa 2
Yazıcı Brother ADS-4500W için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Brother ADS-4500W 10 sayfaları.
Sayfayı Yazdır
4
Connect your machine and install software
Select your preferred scanning method and choose your connection method.
A
Using your machine with your computer or mobile device
Visit
setup.brother.com
install Brother software.
setup.brother.com
For Mac: Visit
support.brother.com/mac
download Brother software.
B
Using your machine as a standalone device (ADS-4300N/ADS-4500W/ADS-4700W/
ADS-4900W only)
Connect your machine to your network using a network cable (purchased separately) or via Wi-Fi
You can set up your Wi-Fi connection either using the machine's control panel or using your computer.
Manual Wireless Setup (ADS-4500W/ADS-4700W/ADS-4900W only)
If you do not have a computer connected to the network or if you cannot connect your machine using your computer, try to set up the
connection manually.
> [Find Wi-Fi
1. Press
Network] > [Yes].
2. Select the SSID (Network
Name).
Enter the Network key
(Password).
NOTE
If setup is not successful, visit support.brother.com for FAQs, Troubleshooting, and manuals.
LED Indications (ADS-4100/ADS-4300N only)
Off
Lit
Blinking
For more information about troubleshooting your machine, see the Online User's Guide.
2
to download and
to
When the wireless setup is
successful, the LCD displays
[Connected].
If you cannot find your SSID or
Network key, ask your network
administrator or wireless access
point/router manufacturer.
Machine Status
Ready
(Blinking slowly)
Sleep
Follow the on-screen
instructions to continue
installation.
For Mobile Devices:
• Set up the connection
manually.
• You can also connect
to your machine if it is
connected to your router/
access point using a
network cable (purchased
separately). For more
information, see the Online
User's Guide.
NOTE
• If setup is not successful, restart your machine
• If using a computer, go back to
Error Status
• Document Jam
• Document Pick Up Error
• Front Cover Open
• Multifeed Detection Error
(ADS-4300N only)
• Access Error
Finish
When finished, restart your computer.
• To check for the latest firmware, visit
support.brother.com/up7.
• If not successful, try to set up the
connection manually.
For detailed scanning instructions,
see the Online User's Guide at
support.brother.com/manuals.
.
®
and the wireless access point/router, and then
repeat these steps.
software.
• Scheduled Maintenance
Notification
• Pick Up Roller
Replacement Notification
A
to install