AEG 66201 KF-N Kurulum ve Kullanım Talimatları Kılavuzu - Sayfa 23

Hob AEG 66201 KF-N için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Talimatları Kılavuzu indirin. AEG 66201 KF-N 32 sayfaları. Aeg ceramic hob installation and operating instructions 66201 kf-n
Ayrıca AEG 66201 KF-N için: Broşür ve Teknik Özellikler (12 sayfalar), Kurulum ve Kullanım Talimatları Kılavuzu (36 sayfalar), Kullanıcı Kılavuzu (32 sayfalar)

Sayfayı Yazdır

1. Installation Instructions

Installation Instructions

Safety instructions

The laws, ordinances, directives and standards in force in the country of

use are to be followed (safety regulations, proper recycling in accord-

ance with the regulations, etc.)

Installation may only be carried out by a qualified electrician.

The minimum distances to other appliances and units are to be ob-

served.

A protective floor must be installed under the appliance.

The cut surfaces of the worktop are to be protected against moisture

using a suitable sealant.

The sealant seals the appliance to the work top with no gap.

Avoid installing the appliance next to doors and under windows. Other-

wise hot cookware may be knocked off the rings when doors and win-

dows are opened.

WARNING!

Risk of injury from electrical current.

• The electrical mains terminal is live.

• Observe connection schematic.

• Observe electrical safety rules.

• Ensure anti-shock protection through correct installation by a quali-

fied electrician.

• The appliance must be connected to the electrical supply by a quali-

fied electrician.

IMPORTANT!

Risk of injury from electrical current.

Loose and inappropriate plug and socket connections can make the ter-

minal overheat.

• Have the clamping joints correctedly installed by a qualified electri-

cian.

• Use strain relief clamp on cable.

• In the event of single-phase or two-phase connection, the appropri-

ate mains cable of type H05BB-F Tmax 90° (or higher) must be used.

• If this appliance's mains cable is damaged, it must be replaced by a

special cable (type H05BB-F Tmax 90°; or higher). Please contact your

local Service Force Center for further advice.

A device must be provided in the electrical installation which allows the

appliance to be disconnected from the mains at all poles with a contact

opening width of at least 3 mm