AEG 66300KF-an Çalıştırma ve Kurulum Talimatları - Sayfa 11
Hob AEG 66300KF-an için çevrimiçi göz atın veya pdf Çalıştırma ve Kurulum Talimatları indirin. AEG 66300KF-an 40 sayfaları. Ceramic glass hob
Ayrıca AEG 66300KF-an için: Kurulum ve Kullanım Talimatları Kılavuzu (34 sayfalar)
Sayfayı Yazdır
Before Using for the First Time
Initial Cleaning
Wipe the ceramic glass cooking surface with a damp cloth to remove any
traces left from manufacturing.
Important: Do not use any caustic or abrasive cleaners! The surface could
be damaged.
Operation of the cooking surface
Touch control sensor panels
To operate the touch control sensor panels, touch the desired panel with
the tip of your pointed finger until the relevant displays illuminate or go
out, or until the desired function is carried out.
Ensure that you are only touching one sensor panel when operating the
appliance. If you finger is too flat on the panel, the sensor panel below may
be actuated as well.
Switching on the appliance
The entire appliance is switched on using the On/Off" sensor panel
Touch the On/Off" sensor panel for approx. two seconds.
The digital displays will show
After the On/Off" sensor panel has been actuated to switch on your
appliance, a cooking setting must be selected for a cooking zone within
approx. 10 seconds, or a time must be set using the timer (egg timer func−
tion). If not, the appliance will switch itself off again for reasons related to
safety.
.
.
11