Brother DCP-130C Kullanıcı Kılavuzu - Sayfa 26

Yazıcı Brother DCP-130C için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Brother DCP-130C 47 sayfaları. Windows vista
Ayrıca Brother DCP-130C için: Şartname Sayfası (2 sayfalar), Hızlı Kurulum Kılavuzu (22 sayfalar), Hızlı Kurulum Kılavuzu (22 sayfalar), Kurulum Kılavuzu (23 sayfalar), Hızlı Kurulum Kılavuzu (24 sayfalar), Hızlı Kurulum Kılavuzu (15 sayfalar)

Important safety instructions

1 Read all of these instructions.

2 Save them for later reference.

3 Follow all warnings and instructions marked on the product.

4 Unplug this product from the wall socket before cleaning the inside of the machine. Do not use

liquid or aerosol cleaners. Use a damp cloth for cleaning.

5 Do not use this product near water.

6 Do not place this product on an unstable cart, stand, or table. The product may fall, causing

serious damage to the product.

7 Slots and openings in the cabinet and the back or bottom are provided for ventilation. To

ensure reliable operation of the product and to protect it from overheating, these openings

must not be blocked or covered. The openings should never be blocked by placing the product

on a bed, sofa, rug, or other similar surface. This product should never be placed near or over

a radiator or heater. This product should never be placed in a built-in installation unless

adequate ventilation is provided.

8 This product should be operated from the type of power source indicated on the label. If you

are not sure of the type of power available, call your dealer or local power company.

9 Use only the power cord supplied with this machine.

10 This product is equipped with a 3-wire grounded plug, a plug having a third (grounded) pin.

This plug will only fit into a grounded power outlet. This is a safety feature. If you are unable to

insert the plug into the outlet, call your electrician to replace your obsolete outlet. Do not defeat

the purpose of the grounded plug.

11 Do not allow anything to rest on the power cord. Do not place this product where people can

walk on the cord.

12 Do not place anything in front of the machine that will block printing. Do not place anything in

the path of printing.

13 Wait until pages have exited the machine before picking them up.

14 Unplug this product from the power socket and refer all servicing to Brother Authorized Service

Personnel under the following conditions:

When the power cord is damaged or frayed.

If liquid has been spilled into the product.

If the product has been exposed to rain or water.

If the product does not operate normally when the operating instructions are followed,

adjust only those controls that are covered by the operating instructions. Improper

adjustment of other controls may result in damage and will often require extensive work by

a qualified technician to restore the product to normal operation.

If the product has been dropped or the casing has been damaged.

If the product exhibits a distinct change in performance, indicating a need for service.

15 To protect your product against power surges, we recommend the use of a power protection

device (Surge Protector).