Brother DCP120C - Flatbed Multifunction Photo Capture Center Hızlı Başlangıç Kılavuzu - Sayfa 25

Yazıcı Brother DCP120C - Flatbed Multifunction Photo Capture Center için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Brother DCP120C - Flatbed Multifunction Photo Capture Center 33 sayfaları. Quick setup guide - french
Ayrıca Brother DCP120C - Flatbed Multifunction Photo Capture Center için: Hızlı Kurulum Kılavuzu (24 sayfalar), Parça Referans Listesi (30 sayfalar), Hızlı Kurulum Kılavuzu (33 sayfalar), (Fransızca) Guide D'installation Rapide (24 sayfalar)

Sayfayı Yazdır

Brother DCP120C - Flatbed Multifunction Photo Capture Center Hızlı Başlangıç Kılavuzu

Installing the Driver & Software

For Network Interface Users (DCP-315CN only)

For Mac OS

X 10.2.4 or greater

Important

Make sure that you have finished the

instructions from Step 1 Setting Up the

Machine on page 4-9.

Disconnect the machine from the power

socket.

Turn on your Macintosh

Put the supplied CD-ROM into your CD-ROM

drive.

Double-click the Start Here OSX icon to install

the printer and scanner drivers. If the language

screen appears, choose your language.

Click MFL-Pro Suite to install.

Follow the on-screen instructions, and restart

your Macintosh

Lift the scanner cover to its open position.

After the DeviceSelector window appears,

connect the network interface cable to your

Macintosh

and then to the machine.

Note

The DeviceSelector window will not appear if you

have connected a USB interface cable to the

machine before restarting your Macintosh

you are overwriting a previously installed version

of the Brother Software. If you encounter this

problem continue but skip 13 through 16. You

should choose your Brother machine from the

Model pop-up menu in the main screen of

ControlCenter2. For details, see Chapter 10 in the

Software User's Guide on the CD-ROM.

Connect the network cable to the LAN socket

marked with a

LAN socket above and to the left of the ink

cartridge slots, as shown below.

Carefully guide the network cable to the trench

as shown below, following the trench around

and toward the back of the machine.

Then, connect the cable to your network.

Macintosh

or if

symbol. You will find the