Brother GT-3 Series Bakım Kılavuzu - Sayfa 13

Yazıcı Brother GT-3 Series için çevrimiçi göz atın veya pdf Bakım Kılavuzu indirin. Brother GT-3 Series 17 sayfaları. Cookbook maintenance
Ayrıca Brother GT-3 Series için: Bakım Kılavuzu (16 sayfalar), Kullanım Kılavuzu (15 sayfalar), Kullanım Kılavuzu (12 sayfalar), Kullanım Kılavuzu (18 sayfalar), Referans Kılavuzu (8 sayfalar), Referans Kılavuzu (8 sayfalar), Manuel (3 sayfalar), Kurulum (4 sayfalar)

Sayfayı Yazdır
Brother GT-3 Series Bakım Kılavuzu
> For less than 2 weeks:
You can leave White Ink in the white tube.
However you must do necessary maintenance for white ink.
> For more than 2 weeks:
You have to use Maintenance Solution according to Instruction Manual.
When you stop to use white ink, please clean Caps, Nozzles and wiper blade of white
Print Heads side.
* See A part of "6-2-6 Required Maintenance for the Long Storage" on Instruction Manual
Perform a complete White Tube Cleaning.
On the end of this process the tubes will be filled with maintenance solution.
Put an almost empty white ink cartridge.
* Maintenance Solution will leak if you leave a Filter Cartridge!
Every two weeks refill tubes with maintenance solution.
When white ink has to be used again, refill tubes with white ink using
> NEVER CHANGE MACHINE MODE TO 341 MODE WHEN WHITE HEADS ARE IN THE MACHINE!
In 341 mode, the white heads will not be purged automatically.
This means that the wiper will do his job in dry condition.
THIS WILL DAMAGE ALL WHITE PRINT HEADS !
> 341 Mode should only be used when white printheads are NOT installed.
Maybe just at installation, when customer decides to use white ink much later
Switch on the printer and insert a USB stick.
Go to the menu:
Company Name:
Representative:
Email address:
Phone number:
IF YOU DON'T WANT TO USE WHITE INK
>
Maintenance
Log copy to USB
HOW TO CREATE A LOG FILE
HOW TO CONTACT MY DEALER ;-)
Load White
341 MODE
12