Brother GTX Ambalajdan Çıkarma Kılavuzu - Sayfa 17

Yazıcı Brother GTX için çevrimiçi göz atın veya pdf Ambalajdan Çıkarma Kılavuzu indirin. Brother GTX 17 sayfaları. Step by step photo instructions
Ayrıca Brother GTX için: Stand Montajı (5 sayfalar), Kullanıcı Referans Kılavuzu (16 sayfalar)

Sayfayı Yazdır

Step 16

• Now each person should pick and end to help

guide and push from. Never do this from the

middle of the printer as this device is designed to

tip forward to set the printer back down.

• Do not touch or lean on the center of the printer

while upright on the trolley especially while

moving it.

• Only touch the center platen area again when both

persons are setup in front and behind the trolley

ready to brace the printer and slowly set it back

down in order to avoid damage or injury.

• Reverse the strapping and mounting processes to

remove the move kit.

DO NOT

LEAN ON

THIS AREA

PUSH AND GUIDE

FROM THE ENDS

ONLY TILT

WHEN TWO

PEOPLE ARE

READY TO SET

DOWN THE

PRINTER