Brother GTX pro Referans Kılavuzu - Sayfa 2

Yazıcı Brother GTX pro için çevrimiçi göz atın veya pdf Referans Kılavuzu indirin. Brother GTX pro 13 sayfaları. Garment printer
Ayrıca Brother GTX pro için: Hızlı Kullanım Kılavuzu (15 sayfalar), Kullanıcı Kılavuzu (16 sayfalar), Kurulum Kılavuzu (40 sayfalar)

Sayfayı Yazdır

1. Daily Maintenance

ENVIRONMENTAL CONDITIONS

Mandatory Temperature & Humidity Requirements

Required to keep your warranty! Temperature & Humidity are recorded in the Log file!

Go to the menu:

> If temperature is too cold, printer will switch automatically to Low-Temp Mode and reduce the SPEED!

> If humidity too low, please install a HUMIDIFIER!

PRE-TREATMENT RATIO & QUANTITY

> This mixing ratio might vary due to the type of garment which is used. Use your experience!

> Don't forget that you have to define a surface of 14 X 16 inches [35 X 40 cm] with your Pre-Treatment

machine to weight the amount of spray, with a scale, after applying the Pre-Treatment liquid on a T-shirt!

> For example, on a Schulze PTM, you should enter a lenght of 36 cm and the full width of 4 nozzles will be

40 cm! And then, calibrate the PT machine to spray 30 g on the garment!

Maintenance

Temperature/Humidity info