Brother GTX pro Kullanıcı Kılavuzu - Sayfa 4
Yazıcı Brother GTX pro için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Brother GTX pro 16 sayfaları. Garment printer
Ayrıca Brother GTX pro için: Referans Kılavuzu (13 sayfalar), Hızlı Kullanım Kılavuzu (15 sayfalar), Kurulum Kılavuzu (40 sayfalar)
Sayfayı Yazdır
4
Best Practice for Printing!
Always keep the closest distance between the PRINT HEADS ant the surface of
the garment! It's very important for the long life of your printer!
Adjusting the Height of the Platen
To provide an optimum printing image quality when a thicker textile is used,
you need to adjust the platen's height related to the thickness of the textile.
To adjust the platen height, loosen the Platen Fixing Lever and move the 1
Platen Height Adjustment Lever 2 to a lower position.
Re-tighten the Platen Fixing Lever if you are happy with new distance. Flatten
down all the wrinkles of the fabric. To check if new textile is not detected by
the sensor, push the button and repeat the process if needed! If you need to
go down further, remove 1 or 2 collars, loosen the knob 3 and push down the
platen bearing by 1 or 2 steps.
Reattach everything and tighten again the Platen Fixing Lever
Don't forget to bring back the platen to the A position after printing on thicker
material!
Always leave the knob 3 tighten after changing position!
If you have to print above the hem and seams, go for UNI-directional printing
to keep quality!
New "Platen Too Low" Sensors