Brother GTX Series Referans Kılavuzu - Sayfa 11

Yazıcı Brother GTX Series için çevrimiçi göz atın veya pdf Referans Kılavuzu indirin. Brother GTX Series 13 sayfaları.
Ayrıca Brother GTX Series için: Referans Kılavuzu (13 sayfalar)

Sayfayı Yazdır

When the printer will not be used for a prolonged period of time, take appropriate proce-

dures before storing the printer depending on storage period or condition.

> DO NOT turn the printer OFF, otherwise, the printer may be damaged.

> WITHIN 2 WEEKS

The printer can be used through normal procedure after the storage period, by perform-

ing the following maintenance tasks:

• Please empty the waste ink in the waste ink tank

• Check the amount of Cleaning Solution in the cleaning liquid tank, and refill the tank

when its amount is below the proper level.

• Stir the white ink if a white ink cartridge stirring message is displayed on the operation

panel screen.

• Print out a Nozzle Check pattern

> FOR MORE THAN 2 WEEKS

When storing the printer for more than two weeks, cleaning of the Nozzle Guard, Wiper

and Exhaust Cap should be performed

Same procedure as above plus:

• If a non-firing nozzle is found, perform Head Cleaning and run the Nozzle Check pat-

tern print, and verify the result again.

CMYK & White inks, Cleaning Solution, Maintenance Solution &

Pretreatment Solution should be stored at a temperature range

between 0° and 40°

> Be carefull NOT to go below Zero degree !

Switch on the printer and insert a USB stick

Go to the menu:

WHEN NOT USING PRINTER FOR LONG PERIOD OF TIME

HOW TO EXTRACT A LOG FILE FROM THE PRINTER?

Maintenance

Log copy to USB

INK & SOLUTIONS STORAGE

STORAGE

TEMPERATURE

MIN

MAX