Brother GTX Series Referans Kılavuzu - Sayfa 3

Yazıcı Brother GTX Series için çevrimiçi göz atın veya pdf Referans Kılavuzu indirin. Brother GTX Series 13 sayfaları.
Ayrıca Brother GTX Series için: Referans Kılavuzu (13 sayfalar)

Sayfayı Yazdır
Brother GTX Series Referans Kılavuzu
Pre
Pre
Treatment
Treatment
1/2 distilled
1/2 distilled
water
water
Add an Open-cells silicon sheet under the T-shirt to extract steam more easily and to have even PT layer
HEATPRESS & TUNNEL DRYER SETTINGS for INK CURING
HEATPRESS
Ink
Curing
TUNNEL DRYER
Ink
Ink
Curing
Curing
Check the Real Temperature with a Probe or with Strips to be sure that you are safe for washability!
The Brother GTX should ALWAYS be left with Power ON
NEVER shut OFF the printer except if requested by the display informations !
Power is requested to perform the needed recirculation of the inks from time to time
NEVER POWER OFF THE PRINTER !
HEAT PRESS SETTINGS for Pre-Treatment DRYING
35
35
Seconds
Seconds
35
35
Seconds
Seconds
3,30
3,30
Minutes
Minutes
180°C
180°C
360°F
360°F
0,7 - 1,4
0,7 - 1,4
180°C
180°C
360°F
360°F
160°C
160°C
320°F
320°F
VERY IMPORTANT
POWER
5 - 5,5
5 - 5,5
Bars
Bars
75 - 80
75 - 80
PSI
PSI
Bars
Bars
10 - 20
10 - 20
PSI
PSI
3