Brother HL-1020 Hızlı Kurulum Kılavuzu - Sayfa 24

Yazıcı Brother HL-1020 için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Brother HL-1020 42 sayfaları. Brother hl-1040: quick setup
Ayrıca Brother HL-1020 için: Parça Referans Listesi (16 sayfalar)

Sayfayı Yazdır

Drum Lamp

The Drum lamp indicates the drum unit is nearly at the end of its life.

Lamp

Printer status

The drum unit can be used.

Off

The drum unit is nearly at the end of its life. Installing a new drum unit

turns off this lamp.

Alarm Lamp

The Alarm lamp blinks to indicate a printer error status such as "Cover Open" and

"Memory Full." If any other error occurs, the printer indicates the error by blinking the

Alarm lamp with another lamp or by printing an error report.

Note

The Ready, Data and Drum lamps are used to indicate printer errors with the Alarm

lamp.

See "ALARM INDICATIONS AT A GLANCE" in this manual

corrective action for the error.

Switch

This switch will be used for the following purposes depending on the situation.

Cancel printing

If you press the switch during printing, the printer immediately stops printing and

ejects the paper.

Wake-up

If the printer is in sleep mode, pressing the switch wakes it up into the ready state.

Form Feed

If the Data lamp is on, press the switch. The printer prints any data remaining in the

printer memory: this operation is called "Form Feed."

Error Recovery

If an error occurs, the printer will recover from some errors automatically. If the error

does not clear automatically, press the switch to clear the error and continue printer

operation.

See "REPLACING THE DRUM UNIT".

- 22 -

and take