Brother HL-1020 Hızlı Kurulum Kılavuzu - Sayfa 35
Yazıcı Brother HL-1020 için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Brother HL-1020 42 sayfaları. Brother hl-1040: quick setup
Ayrıca Brother HL-1020 için: Parça Referans Listesi (16 sayfalar)
Sayfayı YazdırAdditional Memory (HL-1050 Only)
The HL-820/1020/1040 printers have 2 Mbytes of standard memory and additional memory
cannot be fitted.
The HL-1050 printer has 4 Mbytes of standard memory and a slot for optional additional
memory. The memory can be expanded up to 36 Mbytes total by installing a commercially
available single in-line memory module (SIMM).
Note
The HL-820/1020/1040 machine memory cannot be expanded.
Additional memory is useful and may be necessary if you are using the Page Protection
function.
Minimum Memory Recommendation (including resident memory)
Page Protect = AUTO or Off
300dpi
Letter/A4
2 MB
Legal
2 MB
The following types of SIMM are recommended and can be installed:
1 Mbyte
HITACHI HB56D25632B-6A, -7A
2 Mbytes HITACHI HB56D51232B-6A, -7A
4 Mbytes HITACHI HB56A132BV-7A, -7AL, -7B, -7BL
8 Mbytes HITACHI HB56A232BT-7A, -7AL, -7B, -7BL
16 Mbytes HITACHI HB56A432BR-6A, -7A
32 Mbytes HITACHI HB56A832BS-6A, -7A
This printer can accept memory SIMMS with the following specifications:
Speed
Pin Type
Height
Output
Note
The HL-1050 can also support DIB graphics with a resolution of 1200 x 600 dpi under
Windows 95/98/Windows 3.1 with the supplied printer driver. We recommend to expand the
printer memory to avoid any memory full errors.
The printer has only one slot for a SIMM upgrade. If you want to increase your printer
memory again after you have already installed a SIMM module into the slot, you will need
to remove the previously installed SIMM first. For example if you had previously
increased the printer memory from the standard 4MB to 12MB by adding an 8MB SIMM
and you wish to increase your total memory to 20 MB, you need to remove the installed
8MB SIMM and install a new 16MB SIMM into the printer.
600dpi
2 MB
2 MB
60 nsec - 80 nsec
72 pin
35.00 mm (1.38") or less
32 bit or 36 bit
Page Protect = Letter, A4, or Legal
300dpi
Letter/A4 2MB
Legal
3 MB
- 33 -
600dpi
6 MB
6 MB