Brother HL-1040 Hızlı Kurulum Kılavuzu - Sayfa 18

Yazıcı Brother HL-1040 için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Brother HL-1040 42 sayfaları. Brother hl-1040: quick setup
Ayrıca Brother HL-1040 için: Parça Referans Listesi (16 sayfalar)

Sayfayı Yazdır

Action 7-4: Prepare DOS for the Printer

How to Use the Printer in Your DOS Application Software

(without using the Windows system)

Before working with application software that runs in DOS, if you do not already have a

suitable driver installed, you will need to install a printer driver that matches one of the

following supported emulations:

HL-1040 : HP LaserJet IIP, EPSON FX-850, or IBM Proprinter XL printers

HL-1050 : HP LaserJet 6P, EPSON FX-850, or IBM Proprinter XL printers

The following table shows combinations of printer drivers and printer emulation mode. To get

the most out of this printer, you should install an HP printer driver in your application

software.

Printer Model

HL-1040

HL-1050

HL-1040/1050 Epson

HL-1040/1050 IBM

NOTE

The best or recommended printer driver is indicated in bold.

Be sure to choose the correct printer driver in your application software. Failure to do so

may cause poor or inconsistent results.

Ensure that the printing resolution of the HL-1040 is set to 300 dpi in your DOS

application software.

Printer driver supported in

your application software

™

HP LaserJet IIP

™

HP LaserJet II

HP LaserJet 6L/6P

™

HP LaserJet 5L/5P

HP LaserJet 4/4L/4P

HP LaserJet III/IIIP

™

FX-850

™

Epson FX-80

Proprinter

IBM Proprinter

(Only for HL-1040/1050 Users)

Emulation mode to be selected with

the remote printer console program

HP LaserJet IIP emulation mode

Auto emulation selection

™

HP LaserJet 6L/6P emulation mode

Auto emulation selection

™

Epson FX-850 emulation mode

Auto emulation selection

IBM Proprinter XL emulation mode

Auto emulation selection

- 16 -