AEG CERAMIC HOB 6010 K Kullanım Talimatları Kılavuzu - Sayfa 18

Hob AEG CERAMIC HOB 6010 K için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. AEG CERAMIC HOB 6010 K 24 sayfaları. Fitted glass ceramic cooking units
Ayrıca AEG CERAMIC HOB 6010 K için: Kurulum ve Kullanım Talimatları Kılavuzu (20 sayfalar), Kurulum ve Kullanım Talimatları Kılavuzu (20 sayfalar), Çalıştırma ve Kurulum Talimatları (16 sayfalar), Kurulum ve Kullanım Talimatları Kılavuzu (22 sayfalar), Çalıştırma ve Kurulum Talimatları (16 sayfalar)

Installation Instructions

Safety Instructions for the Installer

• This hob must be installed by qualified personnel, according to the

manufacturer's instructions and to the relevant country standards.

• In respect of fire protection, this appliance corresponds to type Y (IEC

335-2-6). Only this type of appliance may be installed with a high

cupboard or wall on one side.

• It is not permitted to fit drawers below the cooking surface.

• Protection against electric shock must be provided by the installation.

• The kitchen unit in which the appliance is fitted must satisfy the

requirements of DIN 68930 in respect of stability.

• Built-in ovens and cooking surfaces are fitted with special connector

systems. They may only be combined with appliances with a matching

system.

• All cut surfaces are to be sealed with a suitable sealant for protection

against moisture.

• On tiled work surfaces, the joints in the area where the hob sits on

the surface must be completely filled with grout.

• On natural, artificial stone, or ceramic tops, the snap action springs

must be bonded in place.

• Ensure that the seal is correctly seated in the frame and that it is

seated against the work surface without leaving any gaps. Additional

silicon sealant must not be applied, this will make removal more diffi-

cult in the event of the need for service.

• To remove the hob, it must be pressed out from below.