AEG HC411521GB Kullanıcı Kılavuzu - Sayfa 12
Hob AEG HC411521GB için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG HC411521GB 24 sayfaları.
Ayrıca AEG HC411521GB için: Kullanıcı Kılavuzu (20 sayfalar)
Sayfayı Yazdır
12
www.aeg.com
The worktop cutout
Distance
from the
wall
Depth
Width
Example:
580 mm
Assembly
1. Calculate correct cutout dimensions.
2. Prepare cutout in the worktop.
3. One by one place the hobs on a soft
surface (for example on a blanket)
with the bottom side up.
4. Attach the supplied seal stripe to the
lower edge of the hob along the
outer edge of the glass ceramic.
5. Insert first hob into the worktop
cutout. Than insert the connection
bar into the worktop cutout. Push it
half of its width under the hob.
minimum 50 mm
490 mm
sum of all widths of hobs that
you install minus 20 mm
+
-
=
360 mm
20 mm
920 mm
6. Insert next hob into the worktop
cutout. Make sure that the front
edges of the hobs are on the same
level.
7. Clean the glass surface.
3.10 Possibilities for insertion
The panel installed below the hob must
be easy to remove and let an easy access
in case a technical assistance
intervention is necessary.
Kitchen unit with door or drawer
A
60 mm
B
A. Removable panel
B. Space for connections
Kitchen unit with oven
The electrical connection of the hob and
the oven must be installed separately for
safety reasons and to let easy remove
oven from the unit.
40 mm
min 20 mm
(max 150 mm)