LG 19CNV42K Cloud V Series Kullanıcı El Kitabı - Sayfa 17

Monitör LG 19CNV42K Cloud V Series için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. LG 19CNV42K Cloud V Series 50 sayfaları. Lg cloud v series monitor (led monitor)
Ayrıca LG 19CNV42K Cloud V Series için: Kullanıcı El Kitabı (50 sayfalar)

Sayfayı Yazdır

CUSTOMIZING SETTINGS

Press the desired button on the bottom of the Monitor set.

Change the value of the menu item by pressing the buttons on the bottom of the Monitor set.

To return to the upper menu or set other menu items, use the up arrow (

Select EXIT to leave the OSD menu.

Button

VOL

CLOUD

AUTO

INPUT

EXIT

(Power Button)

Activates the main menu.

OSD Lock/Unlock

Locks/unlocks the OSD screen.

Functions

y To lock the OSD screen, press and hold the MENU button

y To unlock the OSD screen, press and hold the MENU

Adjust the volume of the monitor.(only works in Cloud mode)/the left arrow key.

Disconnects the connection when the key is pressed for a few seconds while in Cloud

mode;the right arrow key.

To adjust the monitor settings, press the AUTO button on the MONITOR SETUP OSD

menu (only supported for analog signal).

For optimal screen display, use the following resolution.

Optimal Resolution

1440 x 900

Allows selection of the input signal.

y If you connect the monitor to a computer using a D-SUB cable, select either the

CLOUD or D-SUB input signal.

y The initial input signal is D-SUB.

Exits the OSD menu.

y D-SUB Input: Power On/Off

y CLOUD Input

Monitor Off: Press the power button once then the monitor will be turned off after 5

seconds.

CLOUD Off: Press the power button twice then the monitor and CLOUD connection

will be disabled.

CLOUD On: Press the power button.

Power Indicator

When the monitor is in operating mode, the power indicator

will turn Red (on mode).

When the monitor is in power saving mode, the power indica-

tor will blink Red.

CUSTOMIZING SETTINGS

) button.

Monitor set Buttons

Description

for several seconds. The "OSD LOCKED" message will be

displayed and the screen will be locked.

button again for several seconds. The "OSD UNLOCKED"

message will be displayed and the screen will be unlocked.