AEG 61300 Talimat Kitabı - Sayfa 42

Yıkayıcı AEG 61300 için çevrimiçi göz atın veya pdf Talimat Kitabı indirin. AEG 61300 48 sayfaları. Washing machine
Ayrıca AEG 61300 için: Talimat Kitabı (48 sayfalar)

Sayfayı Yazdır

Installation and Connection Instructions

Permanent Connection

In the case of a permanent connection it is necessary that you install a

double pole switch between the appliance and the electricity supply

(mains), with a minimum gap of 3 mm between the switch contacts

and of a type suitable for the required load in compliance with the cur-

rent electrical regulations.

The switch must not break the yellow and green earth cable at any

point.

This appliance is in accordance with the following EU Guidelines:

;

Low Voltage Guidelines 73/23 EEC dated 19 February 1973, include

Guideline Change Notice 93/68 EEC

EMC Guideline 89/336 EEC dated 3 May 1989, including Guideline

Change Notice 92/31 EEC.

This appliance complies with the requirements laid out in the EEC

Directive 76/899.

Voltage 240 V AC

See rating plate for further information.

This appliance meets VDE requirements.

Particular regulations of local electricity authorities must be observed.

This appliance conforms to EEC Directive No. 82/499/EWG on radio

interference.

WARNING! Repairs to electrical appliances must only be carried out by

trained personnel. Improper repairs may lead to serious risks for the

user.

Water Connection

The washing machine is provided with safety devices preventing back-

contamination of the water supply and complies with local water

authority requirements.

This appliance is designed to be permanently plumbed into your homes

water supply.

Before connecting up the machine to new pipework or to pipework

that has not been used for some time, run off a reasonable amount of

water to flush out any debris that may have collected in the pipes.

Fuse rating 13 amps