AEG 7000 ProSteam Kullanıcı Kılavuzu - Sayfa 8
Yıkayıcı AEG 7000 ProSteam için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG 7000 ProSteam 48 sayfaları.
Ayrıca AEG 7000 ProSteam için: Kullanıcı Kılavuzu (48 sayfalar)
Sayfayı Yazdır
8
www.aeg.com
Electrical connection
Level of protection against ingress of solid particles and
moisture ensured by the protective cover, except where
the low voltage equipment has no protection against mois‐
ture
Water supply pressure
1)
Water supply
Maximum Load
Spin Speed
1) The appliance works correctly if the water pressure is not lower than 0.05 MPa (0.5 bar). If you cannot
connect the water inlet hose to the cold water tap of the primary hydraulic system, connect it to your do‐
mestic cold water storage system. Make sure not to exceed a distance of 5.02 m (16.5 ft) between the
appliance inlet hose and the bottom of the water storage tank.
2) Connect the water inlet hose to a water tap with a 3/4'' thread.
5. INSTALLATION
WARNING!
Refer to Safety chapters.
5.1 Unpacking
WARNING!
Remove all the packaging
and the transit bolts before
installing the appliance.
WARNING!
Use the gloves.
1. Remove the external film. If
necessary, use a cutter.
Voltage
Overall power
Fuse
Frequency
Minimum
Maximum
2)
Cotton
Maximum spin speed
230-240 V
2200 W
13 A
50 Hz
IPX4
0.5 bar (0.05 MPa)
10 bar (1.0 MPa)
Cold water
9.0 kg
1551 rpm
2. Remove the cardboard top and the
polystyrene packaging materials.
3. Remove the internal film.
4. Open the door and remove the
polystyrene piece from the door seal
and all the items from the drum.