Fujitsu FI-6750S Başlangıç Kılavuzu - Sayfa 7

Dizüstü Bilgisayar Fujitsu FI-6750S için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Fujitsu FI-6750S 26 sayfaları. Image scanner
Ayrıca Fujitsu FI-6750S için: Kullanıcı Kılavuzu (26 sayfalar), Başlangıç Kılavuzu (14 sayfalar)

Sayfayı Yazdır

AUTION

The following are important cautions described in this manual

Do not install the scanner on an

unstable work table.

When installing the scanner on a work table,

make sure that the table is flat and level. Place

the scanner so that none of its parts extend

beyond the edge of the table.

Also, it must be strong enough to support the

weights of the scanner and other devices.

Firmly insert the power plug.

Firmly insert the power plug into the Power

outlet as far it can go.

Do not block the ventilation ports.

Do not block the ventilation ports. Blocking the

ventilation ports generates heat inside of the

scanner, which may result in fire or scanner

failure.

Do not place heavy objects or stand

on the top of the scanner.

Do not place heavy objects on the scanner or

stand on its top to perform other work.

Doing so might cause injuries and equipment

failure.

Do not use the scanner immediately

after moving it from a cold place into

a warm room.

Do not use the scanner immediately after

moving it from a cold place into a warm room.

Condensation may occur, which might lead to

scanning errors. Let the scanner dry for one or

two hours before you use it.

Before moving the scanner, discon-

nect the power plug from the Power

outlet.

Do not move the scanner with the power and

interface cables connected as this can damage

the cables, which can later cause fire, electric

shock as well as injuries.

Before moving the scanner, be sure to discon-

nect the power plug from the Power outlet, and

all other interface cables. Make sure that the

floor is free of any obstructions.

Protect the scanner from static

electricity.

Install the scanner away from strong magnetic

fields and other sources of electronic noise.

Also, protect the scanner against any static

electricity, which can cause the scanner to

malfunction.Choose a static-free place to

install the scanner.

Avoid any contact when scanner is in

use.

Avoid getting a sleeve, necktie, or hair caught

up in any scanner mechanism during scanning

since this may cause injuries.

Disconnect the power plug from the

Power outlet when the scanner is not

in use for a long period of time.

When the scanner is not going to be used for a

long period of time, be sure to disconnect the

power plug from the Power outlet.

Do not install the scanner in direct

sunlight.

Do not install the scanner under direct sunlight

or near heating apparatus. Doing so might

cause excessive heat to build up inside the

scanner, which can cause scanner trouble or

even fire. Install the scanner in a well-venti-

lated location.

Do not try to move or lift the scanner

alone.

When transporting the scanner, never carry it

alone. The scanner is heavy.

Before moving the scanner, make

sure the transport lock is locked.

(Flatbed type)

When moving the scanner, be sure to lock the

transport lock and the ADF transport lock in

order to prevent damage to the scanner.

Handle documents carefully.

When handling documents, be careful not to

cut your fingers with them.

Do not make the scanner wet while

carrying it outside.

When carrying the scanner outside while it is

raining or snowing, pay special attention so the

scanner does not get wet.