Brother TD-4420TN Kullanıcı Kılavuzu - Sayfa 23

Yazıcı Brother TD-4420TN için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Brother TD-4420TN 44 sayfaları. Cutter module
Ayrıca Brother TD-4420TN için: Kurulum Kılavuzu (2 sayfalar)

Sayfayı Yazdır

1. Troubleshooting

4. Feed the media through the rear label

feed slot.

Note

Make sure that the label print side is

facing up.

5. Open the Roll Compartment Cover. Slide

the Roll Guides outwards, and then align

the paper width with the Roll Guides.

Push down the lock switch to lock the

Roll Guide.

6. Install the label roll as described in

section 3.3.1.

7. Turn the Media Guide Hub, and match

the Media Guide width to the paper

width.

8. Use the Brother Printer Management

Tool to set the media sensor type and

calibrate the selected sensor.

Note

Calibrate the Gap/Black Mark Sensor every time you change the media.