AEG 9000 Series Kullanıcı Kılavuzu - Sayfa 9
Yıkayıcı AEG 9000 Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG 9000 Series 48 sayfaları.
Ayrıca AEG 9000 Series için: Kullanıcı Kılavuzu (32 sayfalar), Kullanıcı Kılavuzu (8 sayfalar)
Sayfayı Yazdır
Water supply pressure
1)
Water supply
Maximum Load
Spin Speed
1) The appliance works correctly if the water pressure is not lower than 0.05 MPa (0.5 bar). If you cannot
connect the water inlet hose to the cold water tap of the primary hydraulic system, connect it to your do‐
mestic cold water storage system. Make sure not to exceed a distance of 5.02 m (16.5 ft) between the
appliance inlet hose and the bottom of the water storage tank.
2) Connect the water inlet hose to a water tap with a 3/4'' thread.
5. INSTALLATION
WARNING!
Refer to Safety chapters.
5.1 Unpacking
WARNING!
Remove all the packaging
and the transit bolts before
installing the appliance.
WARNING!
Use the gloves.
1. Remove the external film. If
necessary, use a cutter.
2. Remove the cardboard top and the
polystyrene packaging materials.
Minimum
Maximum
2)
Cotton
Maximum spin speed
0.5 bar (0.05 MPa)
8 bar (0.8 MPa)
Cold water
9 kg
1551 rpm
3. Remove the internal film.
4. Open the door and remove the
polystyrene piece from the door seal
and all the items from the drum.
ENGLISH
9