Brother Work Smart MFC-J475dw Hızlı Başlangıç Kılavuzu - Sayfa 25
Yazıcı Brother Work Smart MFC-J475dw için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Brother Work Smart MFC-J475dw 35 sayfaları. Work smart series inkjet all-in-one
Ayrıca Brother Work Smart MFC-J475dw için: Hava Baskı Kılavuzu (12 sayfalar), Özellikler (2 sayfalar), Hızlı Kurulum Kılavuzu (37 sayfalar)
Sayfayı Yazdır
For Wireless Network Users
The Authentication/Encryption methods used by the selected wireless access point/router are
not supported by your machine.
For infrastructure mode, change the authentication and encryption methods of the wireless
access point/router.
Your machine supports the following authentication methods:
Authentication method
WPA-Personal
WPA2-Personal
TS-04
Shared key
If your problem is not solved, the SSID or network settings you entered may be incorrect.
Reconfirm the wireless network settings.
See How can I find the wireless security information (SSID and Network Key*) on page 24 to
confirm.
For ad-hoc mode, change the authentication and encryption methods of your computer for
the wireless setting.
Your machine supports Open authentication method only, with optional WEP encryption.
The security information (SSID/Network Key) is incorrect.
Reconfirm the SSID and security information (Network Key).
If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother
TS-05
machine supports the use of the first WEP key only.
See How can I find the wireless security information (SSID and Network Key*) on page 24 to
confirm.
The wireless security information (Authentication method/Encryption method/Network Key) is
incorrect.
Reconfirm the wireless security information (Authentication method/Encryption method/
Network Key) in the table of TS-04.
TS-06
If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother
machine supports the use of the first WEP key only.
See How can I find the wireless security information (SSID and Network Key*) on page 24 to
confirm.
The machine cannot detect a wireless access point/router that has WPS or AOSS™ enabled.
If you would like to configure your wireless settings using WPS or AOSS™, you must operate
both your machine and the wireless access point/router.
Confirm your wireless access point/router supports WPS or AOSS™ and try starting again.
TS-07
If you do not know how to operate your wireless access point/router
using WPS or AOSS™ see the documentation provided with your
wireless access point/router, ask the manufacturer of your wireless
access point/router or ask your network administrator.
Two or more wireless access points that have WPS or AOSS™ enabled are detected.
- Confirm that only one wireless access point/router within range has the WPS or AOSS™
TS-08
method active and try again.
- Try starting again after a few minutes in order to avoid interference from other access
points.
Encryption method
Open
None (without encryption)
TKIP
AES
AES
WEP
WEP
25