AEG EWF8024P5SB Kullanıcı Kılavuzu - Sayfa 37

Yıkayıcı AEG EWF8024P5SB için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG EWF8024P5SB 40 sayfaları.

Sayfayı Yazdır

Fitting Hose Guide

Pull apart to

insert hose.

Adjust length to suit

trough.

In this case, make sure the end cannot

come unhooked when the machine will

be emptied. This could be done by tying

it to the tap with a piece of string or

attaching it to the wall.

Hose

bend

Guide

hose

pull hose

In a sink, drain pipe branch.

This branch must be above the trap so

that the bend is at least 60 cm above

the ground.

Max.

90 cm

Min.

60 cm

Push the drain hose onto the spigot

and secure with a clip, ensure a loop is

formed in the drain hose to prevent

waste from the sink entering the

appliance.

Directly into a drain pipe, at a height

of not less than 60 cm and not more

than 90 cm.

Max. 90 cm

Min. 60 cm

The end of the drain hose must always

be ventilated, i.e. the inside diameter

of the drain pipe must be larger than

the outside diameter of the drain hose.

The drain hose must not be twisted or

curled. Run it along the floor; only the

part near the drainage point must be

raised.

For the correct functioning of the

machine, the drain hose must remain

hooked on the proper support piece

situated on the top part of back side of

the appliance.

ENGLISH