Fujitsu Lifebook B2131 Bios Kılavuzu - Sayfa 6

Dizüstü Bilgisayar Fujitsu Lifebook B2131 için çevrimiçi göz atın veya pdf Bios Kılavuzu indirin. Fujitsu Lifebook B2131 38 sayfaları. Lifebook b series

Sayfayı Yazdır

L i f e B o o k B S e r i e s B I O S

Primary Master Submenu of the Main Menu

The Primary Master submenu identifies what ATA

devices are installed.

Main

Type:

Cylinders:

Heads:

Sectors:

Maximum Capacity:

Multi-Sector Transfers:

LBA Mode Control:

PIO Transfer Mode:

DMA Transfer Mode:

Help

ESC

Exit

Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu

Menu Field

Options

Type:

• Auto

• None

• Hard Disk

Cylinders:

• A number

between 0

and 65,535

Heads:

• A number

between 1

and 16

PhoenixBIOS Setup Utility

Advanced

Security

Primary Master [FUJITSU MHM2200AT-(PM)]

[Hard

[16383]

[16]

[63]

8455MB

[16 Sectors]

[Enabled]

[FAST PIO 4]

[Ultra DMA 2]

Select Item

-/Space

Select Menu

Enter

Figure 2. Primary Master Submenu

Default

[Auto]

–—

Note: Actual hard drive label shown may vary. Depending

on the drive type, information such as cylinders, heads and

sectors may also be displayed.

Power

Boot

Info

Select ATA/ATAPI drive

Disk]

installed here.

[Auto]

The BIOS auto-types the

drive on boot time.

Except [Auto]

You enter parameters of

the drive.

[None]

The drive is disabled.

Change Values

Select

Sub-Menu

Description

Selects the ATA/ATAPI device type. Select Auto to have the type

automatically identified by the BIOS at POST. If None is selected, all

of the following Set-up items do not appear. If Hard Disk is

selected, you must specify the number of Cylinders, Heads, and

Sectors for the drive. Select ATAPI Removable if a removable disk

drive is installed at this connection.

This item appears only when the type is identifed as Hard Disk.

When Hard Disk is selected, you can change the value. This field is

changed by incrementing (pressing the [Spacebar]) or by typing in

the number.

TThis item appears only when the type is identifed as Auto or Hard

Disk. When Hard Disk is selected, you can change the value. This

field is changed by incrementing (pressing the [Spacebar]) or by

typing in the number.

Exit

Item Specific Help

Setup Defaults

F10

Save and Exit