Fujitsu LifeBook B2620 Bios Kılavuzu - Sayfa 10

Dizüstü Bilgisayar Fujitsu LifeBook B2620 için çevrimiçi göz atın veya pdf Bios Kılavuzu indirin. Fujitsu LifeBook B2620 34 sayfaları. Lifebook b series
Ayrıca Fujitsu LifeBook B2620 için: Bios Kılavuzu (38 sayfalar)

Sayfayı Yazdır

L i f e B o o k B S e r i e s N o t e b o o k B I O S

Serial/Parallel Port Configurations Submenu of the Advanced Menu

The Serial/Parallel Port Configurations submenu

provides the ability to set the I/O addresses and

interrupt levels for the serial, infrared and parallel

ports of your notebook.

C A U T I O N

I/O addresses, DMA channels and Interrupt levels can

be entered in various ways, including via the BIOS setup

utility, the control software for the I/O device, or the

hardware. If any two ports or devices, serial or parallel,

have the same I/O address assigned, your notebook will

not function normally. Please keep a record of original

settings before making any changes in the event that a

restoration is required. See your hardware and software

documentation as well as the setup utility to determine

settings, limitations, etc.

Serial Port:

I/O Address:

Interrupt:

Infrared Port:

Mode:

I/O Address:

Interrupt:

I/O Address:

DMA Channel:

Parallel Port:

Mode:

I/O Address:

Interrupt:

Help

ESC

Exit

PhoenixBIOS Setup Utility

Advanced

Serial/Parallel Port Configurations

Select Item

-/Space

Select Menu

Figure 4. Serial/Parallel Port Configurations Submenu

P O I N T S

• To prevent IRQ and address conflicts, avoid changing

the default settings. If you must change the settings,

you can call 1-800-8FUJITSU for technical assistance.

• The BIOS will warn you of a resource conflict by plac-

ing a yellow asterisk next to each device that is in

conflict.

• All I/O addresses in Table 4 are in hexadecimal.

[Enabled]

[3F8 - 3FF]

[IRQ 4]

[Enabled]

[FIR]

[2E8 - 2EF]

[IRQ 3]

[118 - 11F]

[DMA 3]

[Enabled]

[Bi-directional]

[378 - 37F]

[IRQ 7]

Change Values

Enter

Select

Sub-Menu

Item Specific Help

[Disabled]

The port is disabled.

[Enabled]

The port is enabled

with user configuration.

[Auto]

The port is configured

depending on 'Plug &

Play OS' setting.

Setup Defaults

F10

Save and Exit