Fujitsu LifeBook B2630 Bios Kılavuzu - Sayfa 7
Dizüstü Bilgisayar Fujitsu LifeBook B2630 için çevrimiçi göz atın veya pdf Bios Kılavuzu indirin. Fujitsu LifeBook B2630 32 sayfaları. Lifebook b series
Ayrıca Fujitsu LifeBook B2630 için: Bios Kılavuzu (38 sayfalar)
Sayfayı Yazdır
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu
Menu Field
Options
Sectors:
• A number
between 0
and 63
Maximum
• Display only
Capacity:
Multi-Sector
• Disabled
Transfers:
• 2 Sectors
• 4 Sectors
• 8 Sectors
• 16 Sectors
• 32 Sectors
• 64 Sectors
• 128 Sectors
LBA Mode
• Disabled
Control:
• Enabled
PIO Transfer
• Standard
Mode:
• Fast PIO 1
• Fast PIO 2
• Fast PIO 3
• Fast PIO 4
DMA Transfer
• Disabled
Mode:
• Multiword
DMA 1
• Multiword
DMA 2
• Ultra DMA 0
• Ultra DMA 1
• Ultra DMA 2
Exiting from Main Menu
When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to
another menu. If you wish to exit from the setup utility, press the [
If you wish to move to another menu, use the cursor keys.
Default
Description
–—
This item appears only when the type is identified as Hard
Disk. When Hard Disk is selected, you can change the value.
This field is changed by incrementing (pressing the [Space-
bar]) or by typing in the number.
–—
Displays the maximum capacity of the drive calculated from
the parameters of the hard disk when Hard Disk is selected.
[16 Sectors]
This option cannot be changed when Auto is selected. Specify
the number of sectors per block for multiple sector transfer.
[Enabled]
Enables or disables logical Block Addressing in place of Cylin-
der, Head, Sector addressing. This option cannot be changed
when Auto is selected.
[Fast PI0 4]
Selects the method for moving data to/from the drive. Auto-
type the drive to select the optimum transfer mode. This
option cannot be changed when Auto is selected. Multi-word
DMA is automatically set to mode 1 for Fast PIO 1, Fast PIO
2, Fast PIO 3, and set to mode 2 for Fast PIO 4 / DMA.
[Ultra DMA 2]
Selects the method for moving data to/from the drive.
This option cannot be changed when Auto is selected.
M a i n M e n u
] key or use the cursor keys to go to the Exit menu.
Esc
7