Brother P-touch 2700 Yazılım Kurulum Kılavuzu

Etiket makinesi Brother P-touch 2700 için çevrimiçi göz atın veya pdf Yazılım Kurulum Kılavuzu indirin. Brother P-touch 2700 2 sayfaları.

Sayfayı Yazdır

Software Installation Guide

INTRODUCTION

Features

P-touch Editor

Makes it easy for anyone to create custom labels in

Arabic, Persian or English with complex layouts

using fonts, templates, and clip art.

Printer Driver

Lets you print labels from the connected P-touch

labeller when using P-touch Editor on your PC.

This version of P-touch Editor can be used with either an English or

Arabic operating system. While the menus appear in English, Arabic

and Persian text can also be edited and printed.

CD-ROM Precautions

• Do not scratch the CD-ROM.

• Do not subject the CD-ROM to extremely high or extremely low

temperatures.

• Do not put heavy objects on the CD-ROM or apply force to the CD-ROM.

• The software contained on the CD-ROM is meant for use with your

purchased machine only.

It may be installed on multiple PCs for use at an office, etc.

• Do not connect the USB cable to your PC until the software has been

installed and you are instructed to connect.

SYSTEM REQUIREMENTS

Before installation, check that your system configuration meets the following

requirements.

Operating system

Microsoft

Windows

XP / Windows Vista

Windows

Memory

Windows

XP: 128MB or more

Windows Vista

: 512MB or more

Windows

7: 1 GB (32-bit) or 2 GB (64-bit) or more

Hard disk free space 70MB or more

Interface

USB Port (USB Specification 1.1 or 2.0 protocol)

Monitor

SVGA High Color graphics support or higher

Other

CD-ROM drive for installation

Microsoft, Windows and Windows Vista are registered trademarks of

Microsoft Corporation, USA.

The names of other software or products used in this document are

trademarks or registered trademarks of the respective companies

that developed them.

INSTALLING THE SOFTWARE

AND PRINTER DRIVER

INSTALLING THE P-touch Editor AND

PRINTER DRIVER

English

• Do not connect the USB cable to your PC before installing the

software.

• You must be logged on as a user with administrator privileges to

install this software.

Printed in China

LW5758001

• The installation procedure may change depending on the

Operating System on your PC. Windows Vista

an example.

Start your PC making sure to log on as a user with Administrator

privileges.

Insert the CD-ROM into the CD-ROM drive. The P-touch Setup

Screen will appear.

Double click the type of setup

you prefer.

Standard Installation:

All features (P-touch Editor

and the Printer driver) will be

installed (default).

Custom Installation:

You can specify which

features to install.

Recommended for

advanced users.

Read the license agreement carefully. If you agree with the terms and

conditions of the license agreement, click [Yes] to continue the

installation.

Follow the on-screen instructions.

Select the Microsoft

Office

application(s) you would like to

use the Add-In functions with,

and click [Next].

(The Add-In function will let you

create labels directly from your

Microsoft

Office applications.)

When prompted, connect your P-touch labeller to the PC by using the

USB cable, and then turn on the P-touch labeller.

Connect to P-touch

Connect to

USB port.

personal computer

USB port.

Once the printer is detected, the driver will automatically be installed.

When prompted to register your P-touch labeller online, make your

selction and click [Next]. If you have selected to register the product

online, your default internet browser will be launched in a new

window.

Click [Finish] to complete the installation. Restart your PC if you are

instructed to do so.

UNINSTALLING THE SOFT-

WARE AND PRINTER DRIVER

UNINSTALLING THE P-touch Editor

The uninstall procedure for the P-touch Editor differs depending on the

operating system being used.

For Windows Vista

/ Windows

From [Control Panel], go to [Programs] and open [Programs and

Features].

The [Uninstall or change a program] dialog box appears.

For Windows

is shown here as

From [Control Panel], go to [Add or Remove Programs].

The [Add or Remove Programs] dialog box appears.

Choose "Brother P-touch Editor 5.0", and click [Remove (XP) /

Uninstall (Windows Vista

/ Windows

Click [OK].

The uninstall operation starts. After the software is removed from your

computer, the [Maintenance Complete] dialog box appears.

Close the [Add or Remove Programs (XP) / Programs and Features

(Windows Vista

/ Windows

P-touch Editor has been uninstalled.

UNINSTALLING THE PRINTER

DRIVER

Turn off the Brother PT-2700.

For Windows

Click [

], go to [Devices and Printers].

For Windows Vista

From [Control Panel], go to [Hardware and Sound] and open [Printers].

For Windows

From [Control Panel], open [Printers and Faxes] window.

For details, see Windows

Help.

For Windows Vista

/ Windows

Choose "Brother PT-2700", right click on the icon, and then click

[Delete (Windows Vista

) / Remove device (Windows

For Windows

Choose "Brother PT-2700", and click [File]-[Delete].

For Windows

Choose [Fax] or [Microsoft XPS Document Writer] in the [Devices and

Printers] window, and then click [Print server properties], which

appears in the menu bar.

For Windows Vista

In the [Printers] window, right click and select [Run as administrator]-

[Server Properties...].

If the authorization confirmation dialog box appears, click Continue. If

the User Account Control dialog box appears, enter the password and

click [OK].

For Windows

Go to [File]-[Server Properties].

For Windows

Click the [Drivers] tab, and then click [Change Driver Settings].

(If a User Account Control message appears, type in the password,

and then click [OK].)

Choose "Brother PT-XXXX", and then click [Remove...].

For Windows Vista

Click the [Drivers] tab and choose "Brother PT-2700". Then, click

[Remove...].

For Windows

Click the [Drivers] tab and choose "Brother PT-2700". Then, click

[Remove].

For Windows Vista

Choose [Remove driver and driver package] and click [OK].

For Windows

Now, go to step 7.

Close the [Print Server Properties] window.

The printer driver has been uninstalled.

HOW TO USE THE P-touch

Editor HELP

STARTING P-touch Editor Help

Detailed instructions to create labels with the software is described in Help.

Starting from Start button

7)].

Click [Start]-[All Programs]-[Brother P-touch]-[P-touch Editor 5.0].

In the [New/Open] dialog box,

click [Help-How To].

7)] dialog box.

7)].

/ Windows