Fujitsu Lifebook C2310 Bios Kılavuzu - Sayfa 8

Dizüstü Bilgisayar Fujitsu Lifebook C2310 için çevrimiçi göz atın veya pdf Bios Kılavuzu indirin. Fujitsu Lifebook C2310 31 sayfaları. Lifebook c series
Ayrıca Fujitsu Lifebook C2310 için: Yazılım Kılavuzu (39 sayfalar)

Sayfayı Yazdır

L i f e B o o k C S e r i e s N o t e b o o k B I O S

Secondary Master Submenu of the Main Menu

The Secondary Master submenu is for the internal CD-ROM drive. The drive type is displayed on this menu as well as

the Main menu. Your notebook auto-senses the characteristics of the internal CD-ROM Drive installed. You will not

need to modify these settings; they are displayed for your reference. Note that actual drive labels shown may vary.

Main

Secondary Master [TOSHIBA DVD-ROM SDR6112F -(SM)]

Type:

Multi-Sector Transfers:

LBA Mode Control:

Transfer Mode:

Ultra DMA Mode:

Help

ESC

Exit

Table 3: Fields, Options and Defaults for the Primary Slave Submenu of the Main Menu

Menu Field

Options

Type:

• Auto

• None

• CD-ROM

• Hard Disk

Multi-Sector

• Disabled

Transfers:

• 2 Sectors

• 4 Sectors

• 8 Sectors

• 16 Sectors

LBA Mode Con-

• Disabled

trol:

• Enabled

PhoenixBIOS Setup Utility

[Auto]

[Disabled]

[Standard]

[Disabled]

Select Item

-/Space

Select Menu

Enter

Figure 3. Primary Slave Submenu

Default

[Auto]

[Disabled]

Item Specific Help

Select ATA/ATAPI drive

installed here.

[Auto]

The BIOS auto-types the

drive on boot time.

Except [Auto]

You enter parameters of

the drive.

[None]

The drive is disabled.

Change Values

Select

Sub-Menu

F10

Description

Selects the ATA/ATAPI device type. Select Auto to have the

type automatically identified by the BIOS at POST. If None

is selected, all of the following Set-up items do not appear.

Select CD-ROM or Hard Disk for appropriate drive type

installed at this connection.

This option cannot be changed when Auto is selected.

Specify the number of sectors per block for multiple sector

transfer.

Enables or disables Logical Block Addressing in place of

Cylinder, Head, Sector addressing. This option cannot be

changed when Auto is selected.

Setup Defaults

Save and Exit