Brother P-TOUCH CUBE Kullanıcı Kılavuzu - Sayfa 23

Etiket makinesi Brother P-TOUCH CUBE için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Brother P-TOUCH CUBE 25 sayfaları. Tze tape
Ayrıca Brother P-TOUCH CUBE için: Kullanıcı Kılavuzu (18 sayfalar), Kullanıcı Kılavuzu (18 sayfalar), Kullanıcı Kılavuzu (18 sayfalar), Kullanıcı Kılavuzu (18 sayfalar)

Sayfayı Yazdır

Appendix

Problem

The label printer stops while

printing a label.

While printing, striped tape

appears.

The tape is not cut

automatically.

Printed barcodes or QR codes

cannot be read.

There is an approximately 1 in.

/ 25 mm of blank space at the

leading edge of each printed

label.

• I cannot turn on the label

printer.

• The label printer powers off

when I try to print.

It is not possible to charge the

battery.

Battery life is short, even when

fully charged.

I want to check I am using the

latest version of the software.

Replace the tape cassette if striped tape is visible, as this indicates that you have

reached the end of the tape.

The tape cassette is empty. Insert a new tape cassette.

Select Auto Cut.

If using special tapes, cut the tape by hand.

• Try using another barcode scanner.

• Try using another QR code reader application.

• Change the tape. 

Recommended: Black on white tape

• Enlarge barcodes or QR codes using the application, if possible.

Most TZe labels have a clear laminate top layer. This durable laminate helps the

label withstand abrasion, fading and wet conditions providing a crisp, readable

image. The process of adding this laminate layer results in the leading edge of

blank space. Adjusting the label's margin or not cutting the last label may reduce

the amount of blank space.

• The battery may be discharged. Charge it.

• Make sure you have removed the protective sheet. See Insert the Tape Cassette.

• Disconnect the USB cable and connect it again.

• Make sure you have removed the protective sheet. See Insert the Tape Cassette.

The battery may have reached the end of its life. Use a new battery.

Windows

Use the P-touch Update Software to confirm if you have the latest version. See

Windows: Update Software.

Mac

See support.brother.com

Solution