AEG L 60660 FL Kullanıcı Kılavuzu - Sayfa 29
Yıkayıcı AEG L 60660 FL için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG L 60660 FL 36 sayfaları. Aeg washer user manual
Ayrıca AEG L 60660 FL için: Kullanıcı Kılavuzu (36 sayfalar)
13.4 The inlet hose
Do not use an extension hose if
the inlet hose is too short. Con-
tact the service centre for the re-
placement of the inlet hose.
Water pressure
The appliance works correctly if the wa-
ter pressure is not less than 0.05 MPa
(0.5 bar).
45
45
45
O
O
O
20
20
20
O
O
O
• Connect the hose to the appliance.
Turn the inlet hose only left or right.
Loose the ring nut to set it in the cor-
rect position.
• Connect the water inlet hose to the
cold water tap with 3/4 thread.
CAUTION!
Make sure that there are no leaks
from the couplings.
If you can not connect the water inlet
hose to the cold water tap of the primary
hydraulic system, connect it to your do-
mestic cold water storage system.
Make sure not to have more than a dis-
tance of 5.02 m (16.5 ft) between the ap-
pliance inlet hose and the bottom of the
water storage tank.
ENGLISH
29