Brother P-TOUCH CUBE PT-P300BT Kullanıcı Kılavuzu - Sayfa 7
Etiket makinesi Brother P-TOUCH CUBE PT-P300BT için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Brother P-TOUCH CUBE PT-P300BT 18 sayfaları. Tze tape
Ayrıca Brother P-TOUCH CUBE PT-P300BT için: Kullanıcı Kılavuzu (18 sayfalar), Kullanıcı Kılavuzu (18 sayfalar), Kullanıcı Kılavuzu (18 sayfalar), Kullanıcı Kılavuzu (18 sayfalar), Kullanıcı Kılavuzu (18 sayfalar)
Sayfayı Yazdır
- 1. Safety Precautions
- 2. General Precautions
- 3. Performing Routine Maintenance
- 4. Unpack the PT-P300BT
- 5. Specifications
- 6. Troubleshooting
- 7. Troubleshooting (Cont)
- 8. Parts and Components
- 9. Install Batteries or Connect the AC Adapter
- 10. Inserting the Tape Cassette
- 11. Turn the Label Printer on or off
- 12. LED Indications
- 13. Pair the Label Printer with Your Mobile Device
- 14. Print Labels
Accessories
Over time, the Cutter Blade may become blunt from repetitive use. If the Cutter does not
cut tape cleanly, rotate and reset the Cutter Board as shown in the illustration (1).
If you still have difficulties, replace the Cutter Unit (2).
Contact you local authorized Brother reseller or visit brothermall.com to order item TC4, the
Cutter Unit.
Replacing the Cutter Unit
in the illustration (2).
2. Install the new Cutter Unit. Unit by pressing the two new pieces down until they lock into
place.
Unpack the PT-P300BT
Check that the package contains the following before using the label printer. If any item is
missing or damaged, contact your Brother reseller.
PT-P300BT
Cutter Board
1
(green) in the direction of the arrows shown
2
Cutter's Edge
Starter Tape Cassette