AEG L 62270 FL Kullanıcı Kılavuzu - Sayfa 22

Yıkayıcı AEG L 62270 FL için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG L 62270 FL 28 sayfaları.

www.aeg.com

13.2 Possible failures

Problem

The programme does

not start.

The appliance does not

fill with water properly.

The appliance does not

fill with water and drain

immediately.

The appliance does not

drain the water.

The spin phase does not

operate or the washing

cycle lasts longer than

usually.

Possible solution

Make sure that the mains plug is connected to the mains sock-

et.

Make sure that the appliance door is closed.

Make sure that there is not a damaged fuse in the fuse box.

Make sure that the Start/Pause has been pressed.

If the delay start is set, cancel the setting or wait for the end of

countdown.

Deactivate the Child Lock function if it is on.

Make sure that the water tap is open.

Make sure that the pressure of the water supply is not too low.

For this information, contact your local water authority.

Make sure that the water tap is not clogged.

Make sure that the filter of the inlet hose and the filter of the

valve are not clogged. Refer to "Care and cleaning".

Make sure that the inlet hose has no kinks or bends.

Make sure that the connection of the water inlet hose is cor-

rect.

Make sure that the drain hose is in the correct position. The

hose may be too low.

Make sure that the sink spigot is not clogged.

Make sure that the drain hose has no kinks or bends.

Make sure that the drain filter is not clogged. Clean the filter, if

necessary. Refer to 'Care and cleaning'.

Make sure that the connection of the drain hose is correct.

Set the drain programme if you set a programme without drain

phase.

Set the drain programme if you set an option which ends with

water in the tub.

Set the spin programme.