AEG L 70260 TL Kullanıcı Kılavuzu - Sayfa 9
Yıkayıcı AEG L 70260 TL için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG L 70260 TL 32 sayfaları. Top-loading washing machine
Sayfayı Yazdır
TIME SAVE BUTTON
Press the button
6
gramme duration.
• Press one time to set 'Shortened dura-
tion' for items with daily soil.
• Press two times to set 'Extra Quick' for
items with almost no soil.
Some programmes accept only
one of the two functions.
EXTRA RINSE BUTTON
Press button
7
to add rinsing phases to
a programme.
Use this function for persons allergic to
detergents and in areas where the water
is soft.
STAIN BUTTON
Press button
8
to add the stain phase to
a programme.
Use this function for laundry with hard
stains to remove.
When you set this function, put the stain
remover into compartment
This function increases the pro-
gramme duration.
This function is not available with
a temperature lower than 40° C.
SPIN BUTTON
Press this button to:
• Decrease the maximum speed of the
spin phase when you set a programme.
The display shows only the spin
speeds available with the set pro-
gramme.
• Deactivate the spin phase.
• Activate the 'Rinse Hold' function. Set
this function to prevent fabric creases.
The appliance does not drain the water
when the programme is completed.
Spin phase is off.
'Rinse Hold' function is
on.
6
to decrease the pro-
7
8
.
9
TEMPERATURE BUTTON
Press button
10
to change the default
temperature.
- -
= cold water
ACOUSTIC SIGNALS
FUNCTION
You can hear the acoustic signals when:
• You activate the appliance.
• You deactivate the appliance.
• You press the buttons.
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic sig-
nals, press button
7
the same time for 6 seconds.
If you deactivate the acoustic sig-
nals, they continue operate only
when you press the buttons and
when a malfunction occurs.
CHILD LOCK FUNCTION
This function prevents children to play
with the control panel.
• To activate the function, press button
9
and button
10
til the display shows the symbol
• To deactivate the function, press but-
ton
and button
9
until the symbol
You can activate the function:
• Before you press the Start/Pause but-
ton
4
: the appliance cannot start.
• After you press the Start/Pause button
4
, all the buttons and the programme
knob are deactivated.
PERMANENT EXTRA RINSE
FUNCTION
With this function you can keep the extra
rinse function permanently on when you
set a new programme.
• To activate the function press button
5
and button
6
til the indicator of button
ENGLISH
9
10
and button
8
at
at the same time un-
.
at the same time
10
goes off.
at the same time un-
7
is on.