Fujitsu Lifebook E751 Başlarken - Sayfa 3

Dizüstü Bilgisayar Fujitsu Lifebook E751 için çevrimiçi göz atın veya pdf Başlarken indirin. Fujitsu Lifebook E751 13 sayfaları. Fujitsu lifebook e751: specifications
Ayrıca Fujitsu Lifebook E751 için: Veri Sayfası (2 sayfalar)

Sayfayı Yazdır

Initial Start Up

opening the

Display Panel

Connecting the modem

Wireless Device Switch

AC Adapter

DC Power

Jack

Wall Jack

Connecting a LAN

Power/Suspend/Resume

Button

1. open the Display Panel

• Ensure that your LIFEBOOK is on a hard level surface and that

the air vents are not blocked.

• Lift the display, being careful not to touch the screen.

• Adjust the display until it is at a comfortable viewing angle.

2. Connect AC Power

• Plug the power cord into the AC adapter.

• Plug the AC adapter into your notebook.

• Connect the power cord to an electrical outlet.

3. Connect to Internet or Network

• Connect either a phone cord to the modem jack or an Ethernet

cable to the Ethernet Port on your notebook and to a wall jack

or to an Ethernet router.

4. Booting the System

Important:

• During the setup procedure, do not disconnect the power supply,

press any buttons, or use any peripheral devices such as a

mouse, keyboard, or remote control.

• You should not attach any external devices and do not put a DVD/CD in

your drive until you have gone through the initial power on sequence.

The Lithium ion battery is not charged upon purchase.

Initially you will need to connect either the AC adapter

or the Auto/Airline adapter to use your notebook.

• Press the Suspend/Resume/Power button (above the keyboard) to

turn on the notebook. When you do this for the first time, it will display

a Fujitsu logo on the screen. If you do nothing the system will load

the operating system, and then the Windows Welcome will begin.

5. Register

• Accept the Microsoft

Fujitsu End User License Agreement to proceed.

• Select your User ID and Password during the "Welcome Screen."

• Keep a record of your User ID and password stored in a secure place.

• THE SCREEN WILL GO DARK FOR APPROXIMATELY TWO MINUTES.

• DO NOT ATTEMPT TO TURN POWER ON OR OFF DURING THIS STAGE.

6. Registering Your LIFEBooK notebook

• Register your notebook with Fujitsu Service and Support via our

website at us.fujitsu.com/computers.

• You will need to be set up with an Internet Service Provider (ISP)

to register online.

7. Installing Click me!

It is critical that you run Click Me! to install necessary

applications, utilities and drivers.

• To verify a successful installation, the application icons will appear

on the desktop. This process can take up to 15-20 minutes.

• Check to be sure the WLAN switch is on or that your LIFEBOOK is

otherwise connected to the Internet.

• After the first boot, a dialog box will automatically open that

prompts you to run Click Me!. If you choose not run Click Me!

at this time, the Click Me! icon will remain on your desktop.

• When you click the Click Me! icon, your system will automatically

build the icon tray in the bottom right of the screen. Other utilities

(e.g. Bluetooth) and drivers may be installed. Icons will be created

that provide links to application/utilities that you will frequently

access. Once Click Me! is completed the system will reboot.

Windows

Licensing Agreement and the

(For Additional

Utilities)

"Click me!"