Brother P-Touch PT-1600 Hızlı Referans Kılavuzu

Etiket makinesi Brother P-Touch PT-1600 için çevrimiçi göz atın veya pdf Hızlı Referans Kılavuzu indirin. Brother P-Touch PT-1600 2 sayfaları. Electronic labelling system

Sayfayı Yazdır
Common Functions & Commands
1. Cut
1 (1 = cut-pause; no chain print)
2 (2 = no cut-pause; no chain print)
3 (3 = cut-pause; chain print)
4 (4 = no cut-pause; chain print)
2. Contrast
+
+ 2 to –2 ( 0 = default,
= darker,
= lighter)
—
3. Auto Reduction
If label is set to AUTO size, text size
or width will change based on label
length.
Text Size
Text Width
4. Length Adjustment
Increase or decrease the label length
if the length differs from actual.
Setup
+3 to -1, 0 = default
Menu
5. Symbol Save
Personal Category is full, symbols
will be added (on) or not (off).
On
Off
6. Units
Set unit for measurement.
inch
mm
7. Language
Set language for menus, settings
and messages.
English
Français
8. Version Info
Version information for P-touch
software & symbol set.
Main
Boot
Char-Set (Character Set)
Symb-Set (Symbol Set)
1. Length
(Label)
Specify label length.
Length
Auto / 0.30 - 39.00inch
(Auto / 6 - 999mm)
2. Margin
Specify margin.
0.10 - 4.00inch (2 - 99mm)
©2003 Brother International Corporation, 100 Somerset Corporate
Boulevard, Bridgewater, NJ 08807. All rights reserved. All trademarks
and registered trademarks referenced herein are the property of their
respective companies.
LN4394001
Bar Code
1. Bar Code
Type in bar code data.
1. Parameter Settings
Set settings for bar code.
A. Protocol
Specify protocol.
Code 39
UPC-A
Code 128
EAN8
EAN128
EAN13
CODABAR
I-2/5
UPC-E
Bar Code
B. Width
Functions
Specify width of bar code graphic.
Small
Medium
Large
C. Under Number
Specify whether the number is printed
under the bar code.
On
Off
D. Check Digit
Code 39, I-2/5 and CODABAR only,
specify Check Digit on/off.
On
Off
(Line)
1. Style
Set font style.
Style
Normal
Italic
Bold
Italic + Bold
Outline
Italic + Outline
(Line)
1. Size
Set the size for an individual line.
Size
Auto
4mm
1mm
6mm
2mm
9mm
3mm
12mm
1. Copies
1-99
Print
2. Number
(sequential labels)
Off
Options
1-99
3. Block No.
Choose the block numbers (start/end)
to print.
4. Mirror
(print text in reverse order)
Off
On
1. GLB (Global) Size
Set font size for label.
Auto
1mm
2mm
3mm
4mm
6mm
9mm
12mm
2. GLB (Global) Wide
Set label font width.
Minimum
Narrow
Format
Normal
Wide
3. GLB (Global) Style
Set label font style - individual line
style overrides settings.
Normal
Bold
Outline
Italic
Italic + Bold
Italic + Outline
4. Align
Specify text alignment.
Left
Justify
Right
Center
(Label)
1. Frame
Frame
Choose from 14 different borders.
Off
1 – 14
(Label)
1. Clear
Clear
Clear text (and font) to start new label.
Text & Format
Text Only
1. Label Type
Specify type of label printed.
Label
Normal
Type
Rotate
Rotate-Repeat
Port
Panel
Flag
Vertical
Model PT-1600
®