Brother P-touch PT-D410 Manuel - Sayfa 2
Etiket makinesi Brother P-touch PT-D410 için çevrimiçi göz atın veya pdf Manuel indirin. Brother P-touch PT-D410 8 sayfaları.
Ayrıca Brother P-touch PT-D410 için: Hızlı Başlangıç Kılavuzu (9 sayfalar)
Sayfayı Yazdır
• DO NOT forcibly bend or pull the USB Cable or AC Adapter.
• DO NOT touch the AC Adapter or plug with wet hands, otherwise an electrical shock may occur.
• Use only the specified AC Adapter.
• Use only the AC Adapter and USB Cable included with your Label Printer. Failure to do so may result in an
injury to yourself or others, or damage to the Label Printer, or other property. Brother does not assume any
responsibility for any accident or damage resulting from not using the specified AC Adapter and USB Cable.
• DO NOT connect the included AC Adapter and USB Cable to other products.
• Use the AC Adapter with standard electrical sockets (AC 100 V - 240 V 50/60 Hz).
• Insert the plug firmly into the electrical socket.
• DO NOT use the batteries if they are damaged or leaking.
• Keep batteries away from infants. If batteries are ingested, contact emergency services immediately.
• DO NOT use sharp objects, such as tweezers or a metallic pen, to remove or replace batteries.
• If liquid (electrolyte) from the batteries gets into the eyes, wash them immediately with clean water. Contact
emergency services immediately.
• DO NOT solder connections to the batteries.
• DO NOT use the batteries with the polarity (+) (-) reversed.
• DO NOT connect the + and - terminals with metal objects such as wire.
• DO NOT incinerate the batteries or dispose of them with household waste.
• Keep fingers and other body parts away from the Cutter unit.
• DO NOT touch the Cutter unit's blade or insert your fingers inside the
Tape Exit Slot, otherwise fingers and other body parts may be injured.
• DO NOT touch any metal parts near the Print Head. The Print Head
becomes very hot during and immediately after use. DO NOT touch it
directly with your hands.
CAUTION
Failure to observe instructions and warnings could result in minor or moderate injuries.
Label Printer, USB Cable, AC Adapter, Alkaline Batteries
• Use only the specified AA alkaline batteries (LR6).
• DO NOT use combinations of old and new batteries or combinations of different types, charging levels,
manufacturers, or models.
• DO NOT drop the Label Printer when removing it from the box or relocating it, otherwise you may get
injured.
• Be careful when closing the Tape Cassette Compartment Cover. There is a risk of injury if your finger gets
pinched between the upper and lower parts of the cover.
• When you are not using the Label Printer, store it out of the reach of children. In addition, do not allow
children to put the Label Printer parts or labels in their mouths. If any object has been swallowed, seek
medical attention immediately.
• DO NOT leave the Label Printer or any tape within the reach of babies and children.
• Store the Label Printer on a flat, level, and stable surface.
• Remove the batteries and disconnect the AC Adapter if you do not intend to use the printer for an extended
period of time.
• DO NOT press on the Liquid Crystal Display (LCD).
• When disconnecting the AC Adapter from the electrical socket, always hold the AC Adapter.
• DO NOT overload an electrical circuit with the AC Adapter.
• DO NOT open the Tape Cassette Compartment Cover when operating the Cutter unit.
• DO NOT apply excessive pressure to the Cutter unit.
Regulation
Declaration of Conformity (Europe only)
We, Brother Industries, Ltd.
15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561 Japan
declare that this machine is in conformity with the relevant EU harmonization legislation
(Europe only) and UK legislation (Great Britain only).
The Declaration of Conformity (DoC) can be downloaded from our website.
Visit support.brother.com/manuals.
CAUTION
RISK OF EXPLOSION IF BATTERIES ARE REPLACED WITH AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Information for compliance with Commission Regulation 801/2013
PT-D410
Power consumption*
0.6W
* All network ports activated and connected