Fujitsu Lifebook NH751 Başlarken - Sayfa 3
Dizüstü Bilgisayar Fujitsu Lifebook NH751 için çevrimiçi göz atın veya pdf Başlarken indirin. Fujitsu Lifebook NH751 13 sayfaları. Lifebook n series
Ayrıca Fujitsu Lifebook NH751 için: Veri Sayfası (2 sayfalar), Bios Kılavuzu (14 sayfalar)
Sayfayı Yazdır
Initial Start Up
Display cover
Dc Power Jack
LAN Jack
Power/Suspend/Resume
Button
Wireless LAN/Bluetooth
on/off Switch
1. open the Display Panel
• Ensure that your LIFEBOOK is on a hard level surface and that
the air vents are not blocked.
• Lift the display, being careful not to touch the screen.
• Adjust the display until it is at a comfortable viewing angle.
2. connect Ac Power
• Plug the power cord into the AC adapter.
• Plug the AC adapter into your notebook.
• Connect the power cord to an electrical outlet.
3. Turn on Power
• Press the Power/Suspend/Resume button.
• The notebook is now on and the battery is being charged.
• The notebook will begin a power-on self test. Once
successfully completed, the operating system will
begin the initialization process.
4. Starting Windows
Ac Adapter
caution
• Accept the Microsoft
Fujitsu End User License Agreement to proceed. Select your User
ID (optional) and Password during the "Welcome Screen." Keep
a record of your User ID and password stored in a secure place.
THE SCREEN WILL GO DARK FOR SEVERAL MINUTES. Do not
attempt to turn power on or off during this stage.
5. Activate Additional Utilities,
Applications, & Drivers
caution
• Move the WLAN switch to the on position (to configure WLAN
and Bluetooth) and check to be sure your LIFEBOOK is NOT
connected to the network or the Internet.
Ensure that the AC adapter is connected and supplying power
to your notebook before activating Click Me! It will take 25 to
30 minutes for Click Me! to install and configure your drivers
and utilities.
• In addition to an icon on the desktop, a dialog
box will automatically open that prompts you
to run Click Me!. If you choose not to run
Click Me! at this time, the Click Me! icon will
appear on your desktop. When you click the
Click Me! icon, your system will automatically
build the icon tray in the bottom right of the
screen. These icons provide links to utilities
that you will frequently access.
6. connect to the Internet or Network
• Ensure the wireless switch is "On" to turn on the wireless device,
or—
• Connect an Ethernet cable (not supplied) to the LAN jack on your
notebook and to a wall jack or to Ethernet router.
• Register your LIFEBOOK with Fujitsu Service and Support
via our website (us.fujitsu.com/computers). This helps us
to better serve you.
for the First Time
®
When configuring Windows
®
7, skip the step to setup
the WLAN. Otherwise, there may be issues when
activating Click Me!.
®
Windows
®
Licensing Agreement and the
Check to be sure that your LIFEBOOK is NOT
connected to a network or the Internet.
(For
Additional
Applications
and Utilities)
"click me!"
3